Player setup location
This player can be used in a horizontal or vertical position depending on the installation location.
EUsing the player in a horizontal position
Remote control sensor “Front”
EUsing the player in a vertical position
Remote control sensor “Top” 
Remote control sensor “Front”
Switch the remote control sensor to “Front” or “Top” depending on the installation location.
FRONT 
Selector switch for
TOP
Remote control sensor
2Secure the stand to the player.
3Bundle the cables.
Pass the cables through the stand.
Securing the player to a TV stand, etc.
To prevent the player from falling, the stand can be secured to a TV stand, etc.
Using a screw (commercially available), attach the screw to the hole of the stand to secure the player.
Introduction
Installing the vertical stand
When using the player in a vertical position, install the supplied stand.
1 Match the screw hole of the player and the stand.
Screw (diameter: approx. 3 mm)
TV stand, etc.
The screw is attached on the stand.
Screw hole
19