SETTINGS
Manual Update from USB memory device
This function allows software updates by inserting a USB memory device with the update file into the USB terminal on this player.
•When a software update is performed, the software update data must be written onto the USB memory device in advance using a PC.
•The USB memory device must be clear of all files except software update data to allow new software uploading.
To check for the availability of a software update, visit http://www.sharp.de/de.
•When software update data is released, copy the data onto a USB memory device after downloading it to a PC.
•For methods such as downloading and copying to a USB memory device, carefully read the description shown on the website before performing the operation.
NOTE
•Only USB memory devices formatted with FAT 32/16 are compatible.
When formatting a USB memory device using a PC, perform the following settings.
Format File System: FAT32
Allocation Unit Size: Default Allocation Size
•Do not extract the firmware update file to any folders other than the root directory on the USB memory device. The firmware update file must be only one file directly in the root directory.
CAUTION
•Do not remove the USB memory device or unplug the AC cord while the software is being updated.
When you insert a USB memory device, be sure to turn the main power off.
1Insert the USB memory device with the update file into the USB terminal on this player.
USB memory device
2Press Bto turn on the power.
•The screen shown in part 2 of step 9 will be automatically displayed. (Go to part 2 of step 9.)
•If “No” is selected in part 2 of step 9 and wish to update the software manually, perform the operations from step 3.
3Press HOME to display the menu screen.
4Press a/b to select “Settings”, then press d or
ENTER.
5Press a/b to select “Software Update Settings”, then press d or ENTER.
6Press d or ENTER to move to the menu to the right.
7Press a/b to select “USB Memory”, then press
ENTER.
8Press ENTER to start checking data in the USB memory device.
Insert USB memory device containing the software update file.
OK
91During the data checking, “Checking” blinks.
Now checking the data in USB memory device.
Checking
(Continued on the next page)
Settings
51