When using Wireless LAN

Press ENTER, then enter the security key code.

• Enter the exact same security key which has been set in the wireless router.

• The security key code is manually entered using the screen for inputting characters. (See page 48.)

Enter the security key.

Security key:

• The access point name is manually entered using the screen for inputting characters. (See page 48.)

Enter the access point name.

Access Point:

9 Select “Next”, then press ENTER.

10 Press a/b to select your appropriate security key, then press ENTER.

• When selecting WPA/WPA2, selectable security keys are PSK/TKIP and PSK/AES.

Select the security key.

OPEN

WEP

WPA-PSK(AES)

WPA-PSK(TKIP)

WPA2-PSK(AES)

WPA2-PSK(TKIP)

Press ENTER, then enter the access point name.

7 Press a/b to select “desired access point” or “Other Network”, then press ENTER.

• For access points which are set to hide the SSID using the wireless router, select “Other Network” to set the access point.

Select the access point.

XXXXXXXXXXXX

YYYYYYYYYYYY

Other Network

• If selecting “desired access point”, go to step 10.

• If selecting “Other Network”, go to the next step.

SETTINGS

CAUTION

•When a LAN cable is connected to this player, a wireless LAN connection is not available. To use wireless LAN, do not connect a LAN cable to this player.

•When performing the wireless communication setup, security information for the wireless router/access point (WEP, WPA or WPA2 key) is required. Check your wireless router/access point’s information prior to setup.

NOTE

•Before this player can access the Internet wirelessly, setup of a wireless router/access point is required.

1Press HOME to display the menu screen.

2Press a/b to select “Settings”, then press d or

ENTER.

3Press a/b to select “Communication Setup”, then press d or ENTER.

4Press a/b to select “Ethernet Setup (Wireless)”, then press d or ENTER.

5Press a/b to select “Change”, then press

ENTER.

Setting the info. of the Ethernet [Current Setup]

MAC Address : xx xx xx xx xx xx

Access Point	: Not Selected
IP Address	: Auto Setup
Netmask	: Auto Setup
Gateway	: Auto Setup
DNS	: Auto Setup

	Change

	Initialize

•For initializing the current setting, select “Initialize”, then press ENTER.

6The player scans all of the available access points and displays the points with the “Other Network” selection bar on the screen.

•During searching access point(s), “Accessing...” appears on the screen.

•Up to 6 items (5 access points and the “Other Network” selection bar) are displayed on the screen.

•When there are six or more items retrieved, display the next screen by selecting “Next”, then pressing ENTER. (The “Other Network” selection bar is always displayed last.) When no available access points are retrieved, only the “Other Network” selection bar is displayed on the screen.