Sharp BD-HP80U Before Starting Playback, Loading the Batteries, Approximate operating range

Playback

Before Starting Playback

Loading the Batteries in the	Approximate operating range of
Remote Control	remote control

1Hold in the tab on the battery cover and pull the cover towards the direction of the arrow.

You can select the remote control sensor from “Front” or “Top” depending on the orientation of the player and the usage situation. In most cases, the selector switch should be set to “Front”. See page 17 to switch the remote control sensor.

Remote control sensor

2Load the two “AAA” size batteries (R-03 size,

UM/SUM-4). Place batteries with their terminals corresponding to the m and n indications in battery compartment.

3Insert the smaller tab of the battery cover into the opening 1, and press down on the cover until it clicks in place 2.

30º 30º Approx. 22 feet (7 m)

c Remote control unit

NOTE

•Do not subject the remote control unit to shock, water or excessive humidity.

•The remote control unit may not function if the Player's remote sensor is in direct sunlight or any other strong light.

•Incorrect use of batteries may cause them to leak or burst. Read the battery warnings and use the batteries properly.

•Do not mix old and new batteries, or mix different brands.

•Remove the batteries if you will not use the remote control unit for an extended period of time.

WARNING

•Do not use or store batteries in direct sunlight or other excessively hot place, such as inside a car or near a heater. This can cause batteries to leak, overheat, explode or catch fire.

It can also reduce the life or performance of batteries.

22