Sharp BD-HP22H operation manual Option, Press c/d to select Complete, then press

Page 44

SETTINGS

10Select “Next”, then press ENTER.

11For the advanced setting (the setting of the Ethernet connection speeds), press c/d to select “Yes” or “No”, then press ENTER.

•Normally select “No”, then press ENTER.

•The Ethernet connection speeds can be set when you select “Yes”, then press ENTER.

•As automatic detection is made (factory preset mode), this setting is not normally necessary. If a situation occurs in which the Ethernet connection fails, etc., change the setting and confirm if the Ethernet connection successfully works.

When the connection speed is set, select “Next”, then press ENTER.

Option

Ethernet Connection Speeds

Yes

Auto-Detection

10M Half Duplex

100M Half Duplex

Next

No

10M Full Duplex

100M Full Duplex

12For testing the connection to the internet, after confirming the settings, press c/d to select “Test”, then press ENTER.

•“Test” is available only when setting to obtain the IP address automatically. “Test” cannot be selected if the IP address has not been obtained automatically.

Confirm the current setting.

IP Address	: xxx xxx xxx xxx
Netmask	: xxx xxx xxx xxx
Gateway	: xxx xxx xxx xxx

DNS Address : xxx xxx xxx xxx

MAC Address : xx:xx:xx:xx:xx:xx

Test

Complete

•As a result of the test, if the internet connection fails, enter the setup values manually.

13Press c/d to select “Complete”, then press

ENTER.

42

Image 44

Contents BD-HP22H Special Note for Users in the U.K Blue Neutral Brown LivePower Cord Protection IntroductionContents What would you like to do with this Player? Additional Safety Information Dear Sharp CustomerIntroduction Information on Battery DisposalBattery supplied with this product contains traces of Lead Information on Disposal for Users private households Information on Disposal for Business UsersEuropean Union Other Countries outside the EUAbout Discs Blu-ray DiscTypes of Discs that Can Be Used with This Player Discs that Cannot Be Used with This PlayerAbout Discs About the Jpeg file formatAbout Disc Contents Copyright Disc PrecautionsImportant Information Adjust settings Getting StartedUnpacking Selecting equipment to connectMajor Components Main Unit FrontMain Unit Rear Hdmi cable holder on the rear of the main unitKeylock function Remote Control UnitMajor Components Introduction to Connections Video terminals/jacks on this PlayerAnalogue audio connection Broadband Internet connectionConnecting to the Hdmi Terminal Video ConnectionsThis Player Equipment with an Hdmi terminalVideo equipment with component jacks Connecting to the Component JacksVideo Connections Connecting to the Video Jack Video equipment with a video jackYou can enjoy the images through the video jack Connect directlyConnecting to the Digital Audio Terminal Audio ConnectionsAudio equipment with a digital audio input terminal To Optical Input terminalAudio equipment with audio jacks Connecting to the Audio JacksAudio Connections Connecting to the Ethernet terminal Broadband Internet ConnectionExample of a Broadband Internet Connection To LAN terminalLoading the Batteries in the Remote Control Approximate operating range of remote controlConnecting the Power Cord Before Starting PlaybackTurning the Power On Indicators on the PlayerTurning the power on Entering standbyLanguage Setting Operating a Sharp TV Using the Remote ControlPress Setup to display the Setup Menu screen Changing the on-screen display languageTurning Off the LCD Backlight and Indications Using Aquos LinkControlling the Blu-ray disc player using Aquos Link BD/DVD/CD Playback Loading a DiscDisplaying the disc information BD/DVD Video PlaybackUsing the disc menu Using the pop-up menuBD/DVD Menus Start playback by selecting a title from the top menuEnjoying Bonusview or BD-LIVE Virtual PackageDisc PlaybackDVD-R/-RW/BD-RE/-R Playback Playback by selecting a titleAbout Title List ThumbnailSorting the titles Playback by selecting a Playlist Playing back the title you stopped while being playedOperation procedure for the Functions menu Audio CD PlaybackPlayback from the beginning Playback by selecting a trackPlayback Functions Fast Forward/Reverse SearchPause/Frame Advance Playback Slow PlaybackSwitching Subtitles Stereo is displayed. Audio cannot be switchedPartial Repeat Playback Repeat Playback of a Specified Part Displaying the Audio InformationSwitching the Angle Displaying the Angle MarkSetting slide show speed/repeat playback Jpeg File PlaybackPlaying back Slide Show Playing back still images in sequenceFunction Control Settings During PlaybackFunction control operation procedure Settings During Playback Functions which can be setBasic Operation for Playback Setting When setting the PIN code for the first timeSettings Common operationsAudio Video Settings Auto Power Off When the Quick Start function is offQuick Start Audio Out Dynamic Range ControlPlayback Setting Software UpdateSystem Reset Front Display/LEDIf selecting No Go to the next step On the next Communication Setup− IP address and port number of the proxy server Option Press c/d to select Complete, then pressOperation procedure for inputting characters manually Press a/b to select the desired input modeInput character list Press c/d to select a number/character, then press EnterBefore using the USB memory device USB Memory ManagementPress a/b, select Erase or Format, then press Enter Press c/d, select Yes, and press EnterCountry Code List Language Code ListLanguage List About Output of Next Generation Audio FormatsBasic Operation TroubleshootingPower Troubleshooting Picture SoundNetwork AppendixOther Troubleshooting NetworkTo Reset this Player On-screen Error Messages Error message Possible Error Suggested SolutionMessages Relating to BD disc and DVD disc Cannot play Disc cannot be played back withGlossary Glossary Interlace format Region code Jpeg pages 7, 8Letter Box LB 43 Linear PCM SoundSpecifications GeneralPlayback Input/OutputTerms of Guarantee Sharp Corporation