Toshiba BDX2700KU Installing batteries, Open the cover Insert batteries, Close the cover

		• In playback mode, press GOTO,
		then press the number buttons
13	Number buttons	to enter		a title, chapter, track,
		time or file number.
		• In menu mode, press to enter
		the parental code password.
14	GOTO	Press	to	display	the	search
		menu.
		Press to turn on the unit, or to turn
15	ON/STANDBY	the unit into the standby mode. (To
		completely turn off the unit, you
		must unplug the power cord.)
		• During Blu-ray Disc playback,
		press to open a menu that
		lets you control Blu-ray Disc
16	POPUP/TOP MENU	playback.
		• During		DVD playback,		press
		to open the DVD menu (if
		available).
		In playback mode, press to adjust
		picture quality according to your
		preference (Actual effect to picture
17	PIC	may vary depending on TV.):
		• E.P.M (Enhanced Picture Mode):
		The picture is sharper with
		enhanced color.
		• Sharpness
18	INFO	Press to display disc information.
19	RESOLUTION	Press to select the video resolution
		in full stop mode.
20	MENU	Press	to	return to	the previous
		menu.
		In PIP mode, press to turn the
		audio for the secondary video on
21	2nd AUDIO	or off. For more details, see “PIP
		(BONUSVIEW) Setting” on page
		23.

/ / /	Press to select items or settings.
22	Press to confirm or select menu
OK	items.
	In PIP mode, press to turn the

232nd SUBTITLE subtitle for the secondary video on or off.

24	FWD	During playback, press to fast
		forward the playback.
25	PLAY	Press to start playback or resume
		playback.
		• During playback, press to skip to
26	SKIP	the next title, chapter, track or file.
		• During the JPEG playback,
		press to go to the next file.
27	STOP	Press to stop playback.
28		Press to play back the disc in slow
		motion.
29	REPEAT	Press to toggle between various
		repeat modes.
30	RANDOM	Press to turn random function on
		or off.
		Press to play back a defined
31	A-B	section between point A and B
		repeatedly.
32	CLEAR	Press to clear an input error.
33	ENTER	Press to confirm or select menu
		items.

Installing batteries

Install the batteries (AAAx2) matching the polarity indicated inside battery compartment of the remote control.

1 Open the cover.

2 Insert batteries.

Make sure to match the + and – on the batteries to the marks indicated in the battery compartment.

3 Close the cover.

Caution: Never throw batteries into a fire.

Notes:

•Do not mix different battery types or combine used batteries with new ones.

•If the remote control does not operate correctly, or if the operating range becomes reduced, replace both batteries with new ones.

•If the batteries are dead or if you will not be using the remote control for a long time, remove the batteries to prevent battery acid from leaking into the battery compartment.

INTRODUCTION

9