Function setup
Customizing the Function Settings
Done 1 2 3 4 5 6 7 8 9 0 
q w e r t y u i o p 
a s d f g h j k l ; 
z x c v b n m , . / 
Space ` - = \ [ ] '
5.Use 
/ 
/ 
/ 
to highlight Done on the
6.Use 
to highlight Connect, and press OK. If the
wireless network is functioning, 
icon and a message “Connection to XXX...Success” will appear on the TV.
7.Press OK to close the message. The BD player is now connected to the network. From now on, when you turn on the player, it will automatically connect to the network; there is no need to repeat these steps again.
Notes:
•If you do not see this message, the BD player was not able to connect to the network.
•If the wireless network is encrypted using an unsupported encryption (it appears in the network list with an icon), you cannot connect to the network. You must change the router’s encryption type before proceeding.
3.Press the WPS button on the top of your router.
4.Once you see “Success” on the button at the bottom of the screen, the BD player is connected to the router.
Note: If you do not see this message, the BD player was not able to connect to the network. Repeat steps
b.If the BD player is connected to a Wireless Network Using WPS PIN:
2.Press 
/ 
to select Network List, then press OK. A list of existing wireless networks near the BD player will appear (It may take several seconds for this list to be created). For example:
|
| Network List | |
|
|
|
|
| WiFi a |
| |
| WiFi b g n | Panda | |
| WiFi a | dlink_media | |
| WiFi b g | NTGR 11g | |
| WiFi b g | Airport_SN | |
|
|
|
|
3.Press 
/ 
to select the desired wireless network, and press OK to confirm.
4.Press 
/ 
to highlight WPS PIN, and press OK. The following screen will appear:
II.Connection to the wireless Network using
1.Press 
/ 
to select Wireless, then press OK to confirm. the following screen will appear.
Network List |
WiFi Protected Setup (WPS) |
Manual |
IP Settings |
a.If the BD player is connected to a Wireless Network Using WPS Pushbutton:
2.Press 
/ 
to select WiFi Protected Setup (WPS), then press OK.
WiFi Protected Setup (WPS)
Please press the button on your router now
Password
Connect WPS Pin Cancel
Press ENTER to open keyboard
5.Press 
/ 
to highlight connection method you desire, and press OK.
6.Follow the
Network Name (SSID)
Cancel
30