Sherwood BDP-904 manual Setting the Audio, PCM Downsampling, Digital Output, Dynamic Range Control

Setting items

Options

96 kHz :

Outputs audio signals at 96 kHz sampling frequency.

PCM Downsampling

48 kHz* :

Outputs audio signals at 48 kHz sampling frequency.

Set the maximum sampling frequency for the

PCM signals output from the OPTICAL/

■Note :

COAXIAL DIGITAL OUTs.

• When the A/V amplifier does not support LPCM at higher sampling

frequency, no sound or a loud sound may result. Should this happen, set it

to lower sampling frequency.

Digital Output

PCM Stereo*/Bitstream HD/Bitstream Legacy/Bitstream Mixed/PCM 5.1 /

Set the audio format for the digital audio

PCM 7.1.

signals output from the HDMI OUT or the

OPTICAL/COAXIAL DIGITAL OUTs

• For details on the digital audio signals output from the HDMI OUT or the

depending on what audio format A/V amplifier

OPTICAL/COAXIAL DIGITAL OUTs depending on Digital Output settings,

supports.

refer to “Audio output signals” on page 10.

On :

Dynamic Range Control

Turns on the dynamic range compression to hear low sounds easier.

Set whether to compress the dynamic range

Off* :

between the loudest and softest sounds when

Turns it off.

Dolby Digital, Dolby Digital Plus or Dolby

Auto :

TrueHD audio is played back.

When Dolby TrueHD audio is played back, the dynamic range is automatically

adjusted.