Sherwood BDP-904 manual About video/HDMI OUT jacks, About audio/HDMI OUT jacks

BDP-904(A)_091204:BDP-904(A) 2009-12-07 오후 2:17 페이지 6

■About video/HDMI OUT jacks

	• You don’t need to make all kinds of video connections
	between components. (e/ g., this unit to A/V amplifier, A/V
	amplifier to TV and so on.)
	Depending on what kinds of video jacks that A/V amplifier
ENGLISH	TV, etc. has, we recommend you to make the same kinds
	of video connections between components.
		Jack type	Video resolution
	High	Digital
	quality		High Definition :
			1080/24p, 1080p, 1080i, 720p
			Standard Definition :
			480p(/576p), 480i(/576i)
		Analog
			High Definition :
			1080i, 720p
			Standard Definition :
			480p(/576p), 480i(/576i)
	Standard		Standard Definition :
			480i(/576i)
	quality

■About audio/HDMI OUT jacks

•You don’t need to make all kinds of audio connections. Connect this unit to A/V amplifier depending on the audio input jack that A/V amplifier has.

Jack type

High Digital quality

Analog

Standard

quality

1. Connecting AUDIO OUTs

•Connect these jacks to the AUDIO IN jacks of BD(DVD, CD, etc.) of your amplifier.

2. Connecting DIGITAL AUDIO OUTs

•Connect either the OPTICAL or the COAXIAL DIGITAL OUT jack to the corresponding DIGITAL IN jack of your amplifier. (You don’t need to do both.)

■Notes :

•When your amplifier is not compatible with the digital signals that are output from this unit, loud noise or no sound may be heard from the speakers, and it may be harmful to your ears and damages the speakers. To prevent it, you should disconnect the DIGITAL OUTs to your amplifier and make analog audio connection.

•When making the COAXIAL DIGITAL connection, be sure to use a 75Ω COAXIAL cord, not a conventional AUDIO cord.

3. Connecting COMPOSITE VIDEO OUT

•Connect this jack to the (composite)VIDEO IN jack of your amplifier or TV.

4. Connecting COMPONENT VIDEO OUTs

•Connect these jacks to the COMPONENT VIDEO OUT jacks of your amplifier or TV.

•When making COMPONENT VIDEO connections, connect “Y” to “Y”, “PB” to “PB” (, “Cb”, “B-Y”), “PR” to “PR” (, “Cr”, “R-Y”).

■Notes :

•If the resolutions of the video signals which are output from the COMPONENT VIDEO OUTs and/or the HDMI OUT and your TV are not matched, the picture is not clear, natural or displayed.

To prevent it, you should set the Resolution to one which the TV can handle. (For details, refer to “SETTING THE DISPLAY” on page 30.)

•Do not connect the unit to the TV through a VCR. Otherwise the picture may be disturbed due to the copy protection function.

5. HDMI OUT CONNECTOR

•Refer to “CONNECTING TO TV WITH HDMI IN CONNECTOR” on next page.

6. LAN CONNECTOR

• Refer to “CONNECTING TO NETWORK” on page 9.

7. AC INPUT CORD

• Plug the cord into a wall AC outlet.

6