Sherwood BDP-904 manual CONNEcTING to TV with Hdmi in cONNEcTOR, Copyright protection system

Page 7

BDP-904(A)_091204:BDP-904(A) 2009-12-07 오후 2:17 페이지 7

cONNEcTING TO TV WITH HDMI IN cONNEcTOR

•If you have a HDMI IN connector equipped TV or projector, etc., connected it to the HDMI OUT connector of this unit using a commercially available HDMI cord.

The HDMI connection can carry uncompressed digital video and multi-channel (up to 7.1ch) digital audio signals.

•Among the HDMI IN connector equipped TV or projector, etc., some do not support audio output (for examples, projectors). In such a case, make an audio connection between this unit and A/V amplifier.

•If you have a DVI IN connector equipped TV or projector, etc., compatible with both DVI and High-bandwidth Digital Content Protection (HDCP), connect it to the HDMI OUT connector of this unit using a commercially available HDMI-DVI converter cord.

Since the HDMI-to-DVI connection cannot carry audio signals, you should make an audio connection. (For details on audio connection, refer to the operating instructions of the DVI IN connector equipped component.)

•If you have a HDMI or DVI connector equipped A/V amplifier, you can connect this unit to TV or projector, etc., through A/V amplifier. (For details on connection between components, refer to the operating instructions of your amplifier.)

ENGLISH

TV, Projector, etc.

(analog) AUDIO IN

DIGITAL IN

DVI

IN

HDMI

IN

DVI and audio connections

or

This unit

(analog) AUDIO OUT

DIGITAL OUT

■Copyright protection system

•This unit supports HDCP (High-bandwidth Digital Contents Protection), technology to protect copyright of digital video signals against illegal duplication. HDCP must also be supported on the components connected to this unit.

If a component incompatible with HDCP is connected, the video signals will not be output properly.

•This unit is HDMI Ver. 1.3 compatible.

•HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI licensing LLC.

■Notes :

•When connecting the HDMI OUT connector to TV or projector, etc., you should set Display and Audio settings correctly. (For details, refer to “SETTING THE DISPLAY” on page 30 and “SETTING THE AUDIO” on page 31.)

•For stable signal transfer, we recommend using HDMI cords that are a maximum of 5 meters in length.

•Among the components that support HDMI, some components can control other components via the HDMI connector. However, this unit cannot be controlled by another component via the HDMI connector.

•The audio signals from the HDMI connector (including the sampling frequency and bit length) may be limited by the component that is connected.

7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents BDP-904 220 240 IntroductionAll units are suitable for use on supplies 220-240 V AC Moisture condensation PrecautionsCONTENTS System Connections CONNEcTING to A/V Amplifier or REcEIVERAmplifier or Receiver Speakers About audio/HDMI OUT jacks About video/HDMI OUT jacksCopyright protection system CONNEcTING to TV with Hdmi in cONNEcTORCONNEcTING to Network Hdmi OUT Video output resolutionAudio output signals Remote Sensor Front Panel ControlsDisc Tray OPEN/CLOSELED Remote ControlsStep FORWARD/BACKWARDLoad two batteries AAA size, 1.5V matching Polarity Remote cONTROL Operation RangeLoading Batteries Remove the coverUnplayable discs Preliminary Knowledge About DiscsPlayable DISc Types Region cODECARE and Handling of DIScS Playable FilesPlaying a DISc Before operation, enter the standby modeStandby mode, turn the power on OperationsSlow playback To start playback from the menuTo stop playback To pause playbackPress the OK button Displaying disc informationPlaying the desired section of disc During playback, press the GO to buttonPlaying in random order Operations using disc menu, top menu, and Pop-up menuPlaying repeatedly Playing a specific section repeatedlyDuring playback, press the Audio button Switching the audio soundtrackDuring playback, press the Popup Menu button Press the Popup button to exitDuring playback, press the Subtitle button Switching the subtitlesSwitching the camera angles Adjusting the brightness of the fluorescent displayPlaying secondary videoPicture in Picture Press the Cursor Right button to enter the PIP mode menuVirtual Package When selecting the Play File When selecting the Playlist Optical Disc or the USBWhen selecting the Remove from Playlist When selecting the Add To PlaylistTo specify the time interval Selecting an item in the play menuDisplaying file information When entering file numberPlaying the desired section of file To change the effect on displaying pictures When clearing the number enteredWhen selecting the Slide Show Effects When selecting the Slide Show DelayTo control the music files During playback of music files, press the OK buttonDisplay System SettingsSetting the System Setting the Display Dynamic Range Control Setting the AudioPCM Downsampling Digital OutputSubtitle Setting the LanguageMenu AudioParental Password Cancel Setting the Parental cONTROLWhen selecting the Parental Control or the Parental Level When selecting the Parental PasswordWhen selecting the Manual Setting the NetworkWhen selecting the Wired IP SettingsWhen selecting the Manual or the Dynamic When selecting the Network TestWhen selecting the Off Avchd Advanced Video Codec High Definition Definition Of TermsHdmi Problem Possible Cause Remedy Troubleshooting GuideSpecifications GNU General Public License LicensePreamble English No Warranty How to Apply These Terms to Your New Programs BDP-904

BDP-904 specifications

The Sherwood BDP-904 is a versatile and feature-rich Blu-ray player designed to elevate the home entertainment experience. Aimed at providing high-quality audiovisual playback, this player boasts an array of technological innovations, making it a great choice for both cinephiles and casual viewers alike.

One of the main features of the Sherwood BDP-904 is its excellent support for high-definition video formats. It is capable of playing back Blu-ray discs in stunning 1080p resolution, ensuring that users can enjoy their favorite movies with incredible clarity and detail. Moreover, it supports various video formats, including AVCHD and MKV, which allows users to experience a broad range of content.

Another standout characteristic of the BDP-904 is its advanced audio processing capabilities. The player supports high-resolution audio formats such as Dolby TrueHD and DTS-HD Master Audio, which deliver a truly immersive surround sound experience. Coupled with an onboard 24-bit/192 kHz DAC, the player ensures that every nuance of the audio is reproduced with remarkable fidelity, enhancing the overall viewing experience.

Connectivity is also a strong point for the Sherwood BDP-904. It features HDMI output for easy integration with modern televisions and AV receivers. Additionally, it comes with USB ports, allowing users to play back media directly from USB storage devices, while the player’s Ethernet port enables online streaming services. With built-in Wi-Fi, users can enjoy seamless connectivity to popular platforms like Netflix and YouTube, making it easy to access a wide array of content without the need for additional devices.

The user interface on the Sherwood BDP-904 is designed to be intuitive and user-friendly, making navigation through menus and settings simple, regardless of the user’s technological expertise. The remote control is thoughtfully designed, providing quick access to essential functions and settings, enhancing the overall usability of the device.

With its sleek, compact design, the BDP-904 can fit seamlessly into any home theater setup. It combines performance, functionality, and aesthetics, making it an appealing addition for anyone looking to enrich their home viewing experience. Overall, the Sherwood BDP-904 stands out as a reliable and feature-packed Blu-ray player, ready to meet the demands of modern home entertainment.
Top Page Image Contents