Connections
Connecting to a digital amplifier/AV receiver
Route the sound from this player to other device to enhance audio output.
•Connect a coaxial cable from the COAXIAL DIGITAL jack on this product to the COAXIAL jack on the device.
•If your AV receiver or amplifier has an HDMI jack, you can also connect the HDMI cable to HDMI IN jack on your AV receiver or amplifier.
AV receiver / amplifier
DIGITAL AUDIO INPUT
COAXIAL
digital audio coaxial cable
(not included)
Connecting to network
Your
•By connecting an Ethernet cable to the ETHERNET jack on the rear of your player and to a wired hub or router. Using a wired network provides the best performance, because the attached devices connect directly to the network and are not subject to radio frequency interference.
•By connecting through the
Connecting your player to a wired router
•Connect an Ethernet cable (CAT5 or better with RJ45 connector) to the ETHERNET jack on the back of your player and to an Ethernet jack on a hub or broadband router.
Networking equipment
(modem, etc.)
LAN
LAN cable
Internet
LAN
Hub or broadband router
WANLAN
5 |
| 4 |
| 3 |
| 2 |
| 1 |
LAN cable
Notes:
• Do not connect a modular p h o n e c a b l e t o t h e ETHERNET jack.
•When plugging or unplugging the cable, hold the connector on the end of the cable. When unplugging, do not pull on the cable. Press down the lock tab and pull the connector out of the jack.
•Because there are various connection configurations, follow the instructions from your telecommunication carrier or Internet service provider.
11