Toshiba BDX3300 owner manual Network, Connect to network with Ethernet, Scan, Manual, Auto

3. Select a rating level, then press OK.

Notes:

System

Language

Playback

Security

Network

Off

General Setting

Screen Save			Off
Parental Control
Disc Auto	Playback		On
Select level:		Off
CEC			On
		[1] KID SAFE
Disc Auto Upgrade[2] G			On
Load Default			More...

RETURN Return

- Ensure that the network cable is properly

connected and the router is switched on.

- During [Manual] mode, if the number is entered

incorrectly, press to erase the number.

- This player does not support automatic detection of

cross-cables. Use the straight (standard) LAN cable.

Connect to network with Wireless

1. In the Setup menu, select [Network], then

English

Items	Description
KID SAFE	Safe for kids
G	All children and general guidance
PG	Parental guidance
PG-13	Parental guidance for children under 13
PGR	Parental guidance Recommended
R	Restricted viewing
NC-17	No one 17 and under allowed
ADULT	Adult only

Notes:

-Rated discs above the level you set in [Parental

Control] require a password to be entered.

-The ratings are country dependent. To allow

all discs to play, select 'Off'.

[Network]

	General Setting
System	Interface
Language	Wireless Setting
Playback	IP Setting
Security	Connection Test
Network	Information

Move cursor key to select menu option	SETUP Exit
then use “OK ” key to select

To enjoy BD-LiveTMbonus contents, Media Server Search, Picasa, YouTube, BBC iPlayer and External Control, set up the network connection.

Connect to network with Ethernet

1.Connect the Blu-ray Disc™ player to the broadband modem or router.

2.In the Setup menu, select [Network], then press .

3.Select [Interface] in the menu, then press OK to select [Ethernet].

4.Select [IP Setting] in the menu, then press OK to select [Auto]. An IP address is obtained automatically.

If no IP address is obtained, select [Manual] to input IP Address, Subnet Mask, Default Gateway, DNS1/DNS2 and press OK to re-connect again to the network. It will try to obtain the IP address again.

5.Press RETURN or press OK to exit.

press .

2. Select [Interface] in the menu, then press OK

to select [Wireless].

3. A message will pop up on the screen, select

"Yes" to continue.

4. Select [Scan] or [Manual] or [Auto].

5. Then select "Next" and press OK to continue.

[Scan]

Select [Scan] in the menu, the Blu-ray DiscTM

player will start scanning and provide a list of

available network in your area. Select your

network ID and then press OK twice, the

alphanumeric keys will appear for you to

input your password. If your network does

not required password, press OK once.

[Manual]

If you know the details information of a

network, you can choose this way to connect a

wireless network. First, enter the ID of the

network (SSID), then select the encryption

type of WPS and lastly enter the password.

Press OK to call out the alphanumeric keys

on the screen for your entries. Then you can

connect the Blu-ray DiscTM player to the

network.

[Auto]

The Blu-ray DiscTM player will try to connect

automatically to a wireless network.

PBC (Push Button Configuration):

1. Turn on the router, set it to WPS, then press

WPS button if it has it.

2. Switch on the Blu-ray DiscTM player and

connected devices, then use remote control to

choose: General Setting -> Network ->

Interface -> Wireless -> Auto -> PBC -> Next.

3. Press SETUP to exit.

PIN (Personal Information Number):

1. Turn on the router.

2. Switch on the Blu-ray DiscTM player and

connected devices, then use remote control to

choose: General Setting -> Network ->

Interface -> Wireless -> Auto -> PIN.

A set of PIN code will be prompted.

3. Then open web browser to go to the router

setting page to input the PIN code.

4. Select "Next" on the Blu-ray DiscTM player.

5. Press SETUP to exit.

19