Toshiba BDX3300 owner manual Connections, Connecting to a TV, Optional Connection

Page 9

3 Connections

Make the following connection to use this product.

Connecting to a TV

Connect the product to TV via HDMI jack to view the playback from the disc.

Connect to the HDMI Jack

HDMI IN

1.Connect a HDMI cable from the HDMI output jack on this product to the HDMI input jack on the TV.

Optional Connection

Option 1: Connect to the digital amplifier/ receiver

Option 2: Connect to network

Option 3: Connect to Wifi

Option 1: Connect to the digital amplifier/receiver

Route the sound from this player to other device to enhance audio output.

DIGITAL AUDIO

INPUT

COAXIAL

1.Connect a coaxial cable from the COAXIAL jack on this product to the COAXIAL jack on the device.

Option 2: Connect to network

Connect this product to the network to enjoy BD-LiveTMbonus content, Media Server Search, Picasa, YouTube, BBC iPlayer, External Control and software upgrade by network.

1.Connect the network cable from the LAN jack on the product to the LAN jack on the network system.

Option 3: Connect to Wifi Your Blu-ray Disc™ player has an integrated Wi-Fi®device and antenna. No physical connection to the wireless router is necessary.

wireless access point

1 Configure your player to access the wireless access point or router.

2 The network configuration and connection method may vary depending on the equipment in use and the network environment. Your Blu-ray Disc™ player is equipped with an IEEE 802.11n wireless module, which also supports the 802.11 b/g/n standards. For the best wireless performance, we recommend using an IEEE 802.11n certified Wi-Fi®network (access point or wireless router).

Notes:

You must use a wireless IP sharer that supports IEEE 802.11b/g/n. (n is recommended for stable operation of the wireless network.)

Wireless LAN, in its nature, may cause interference, depending on the use condition

(AP performance, distance, obstacle, interference by other radio devices, etc.).

Set the wireless IP sharer to Infrastructure mode. Ad-hoc mode is not supported.

When applying the security key for the AP (wireless IP sharer), only the following is supported.

1.Authentication Mode: WPAPSK, WPA2PSK.

2.Encryption Type: WEP, TKIP, AES.

English

9

Image 9
Contents BDX3300KB Contents EU Conformity Statement Safety and important noticeDisposal of your old product and batteries General InformationCopyright notice Blue Neutral Brown LiveEnglish Regions Codes Your ProductBD-LiveTM Blu-ray DiscTM JavaProduct overview Main UnitControl Function Remote Control Connecting to a TV ConnectionsOptional Connection Preparation Prepare the remote controlConnect USB device Always follow the instructions in this chapter in sequencePlayback Previous and Next Instant Search and Instant ReplaySlow Forward Step ForwardUse /// to select an image PlaylistBlu-ray DiscTM Bonusviewtm Reverse modePlaying Secondary Video Picture-in-Picture This function is not available whenCustomizing General SettingDisc/USB Storage/Internet SW upgrade by Disc/USB Storage UpgradeExternal Memory Power Down ModeLanguage OSDSecondary Audio Mark Change passwordLast Memory PBCNetwork PBC Push Button ConfigurationConnect to network with Ethernet ScanDisplay Setting Video Adjust ResolutionTV Screen 1080i, 1080pSystem Information Audio SettingPlay a slideshow PicasaYouTube BBC iPlayerSpecification Problem Tip TroubleshootingCannot find a Jpeg file Cannot upgrade SWMore than 9,999 files for DVD and 999 files for CD Cannot find a MP3 fileAspect ratio GlossaryJpeg License Information on the Software Used in This Product GNU GPLv2 Modification follow GNU Lesser General Public License LGPLv2.1If a facility in the modified Library refers to a function English ICU License ICU 1.8.1 and later No Warranty Because the Library is Licensed FreeOpenssl All rights reservedFreeType Project License ZlibExpat CurlLibjpeg-7 GPLv3 AresEnglish English Legal Notices displayed by works containing it or Limitation of Liability Libpng Bisonparser