Magnavox MBP5220F owner manual Manual Wireless, Use Î/ ï to select Next, then press OK

6. Use [Î/ ï] to select “Next”, then press [OK].

Access Point Setting (Auto Scan)

Please confirm the setting.

SSID	: Access 1
Security	: XXXXX

Next	WEP/WPA Key : XXXXXXX
Retry
Cancel
	3/7

7.Use [Î/ ï] to select “Auto” or “Manual”, then press [OK].

•If you select “Auto”:

Follow step 4 in “Auto (Wired)” on page 41.

•If you select “Manual”:

Follow steps 3 to 12 and 14 to 16 in “Manual (Wired)” on page 42.

DNote

• The internal wireless LAN supports following specifications.

- Wireless standards	: IEEE 802.11 b/g/n
- Frequency	: 2.4 GHz
- Security protocol	: WEP / WPA / WPA2

Manual (Wireless)

Set up the connection to the wireless router manually by entering the wireless network name (SSID). In the following cases, select “Manual”(wireless) to set each setting as necessary.

- When connection test failed with the setting of “Auto Scan”(wireless).

1.Follow steps 1 to 2 in “Auto Scan (Wireless)” on page 44.

2.Use [Î/ ï] to select “Manual”, then press [OK].

3.Wireless router name (SSID) entry screen will appear. Enter the wireless network name (SSID) using cursor buttons, number buttons and color key, then press [RED].

4.Security mode select screen will appear. Select the desired security mode, then press [OK].

• If you select “None”, please go to step 6.

Network Settings (Manual)

IP Address

Please input the IP Address.

0 . 0 . 0 . 0

Nextext Back Clear OK

Cancel

5/7

EN

5.“WEP/WPA Key” entry screen will appear. Enter the WEP / WPA / WPA2 key of the selected wireless network using cursor buttons, number buttons and color key, then press [RED].

•If you do not know the WEP / WPA / WPA 2 key for your wireless network, please confirm the sticker on the router.

6.Use [Î/ ï] to select “Next”, then press [OK].

Continued on next page.

EN-45