Magnavox MBP5220F owner manual Auto Scan Wireless

DNote for “IP Address”,“Subnet Mask”,“Default Gateway”,“Primary DNS” and “Secondary DNS”

• The range of input numbers is between 0 and 255.

• If you enter a number larger than 255, the number will automatically be 255.

• When you enter a wrong number, select “Clear” to clear. (The number will be back to “0”.)

• If you want to enter a 1 or 2-digit number in one cell, press [Æ] to move on to the next digit’s in the cell.

DNote for “Proxy Address” and “Proxy Port”

•The range of input numbers for the port number is between 0 and 65535. (If you enter a number larger than 65535, it will be regarded as 65535.)

•For proxy port, certain ports might be closed, blocked or unusable depending on your network environment.

•Choose a connection speed in accordance with your network environment.

•When the settings are changed, the network connection may be disabled depending on the device.

■Wireless

If you connect this unit to a wireless network, select “Wireless” and set up necessary settings.

Please make a note of your wireless network name and its WEP / WPA / WPA2 key before proceeding with the setup.

Auto Scan (Wireless)

1.Use [Î/ ï/ Í/ Æ] to select “Network Setup” in the home menu, then press [OK].

2.Use [Î/ ï] to select “Wireless”, then press [OK].

3.Use [Î/ ï] to select “Auto Scan”, then press [OK].

•This unit will start searching for wireless networks automatically.

4.The result of wireless network searching will be displayed. Use [Î/ ï] to select the appropriate wireless network name (SSID), then press [OK].

•If you select an SSID with “”, please go to step 6.

Access Point Setting (Auto Scan)

Please select the access point.

Access 1

Access 2

Access 3

Retry

Cancel

3 / 7

5.“WEP/WPA Key” entry screen will appear. Enter the WEP / WPA password of the selected wireless network using cursor buttons, number buttons and color keys, then press [RED] to confirm the password.

•If you do not know the WEP / WPA / WPA 2 key for your wireless network, please confirm the sticker on the router.

Access Point Setting (Auto Scan)

Please input the WEP/WPA Key with software keyboard.

XXXXXXX

1	2	3	4	5	6	7	8	9	0	SP
a	b	c	d	e	f	g	h	i	j	a/A/@
h	l	m	n	o	p	q	r	s	t	CLR
u	v	w	x	y	z	.	-			Done
Done			Cancel				Clear			a/A/@
						3 / 7

Continued on next page.

EN-44