6. Use [Î/ ï] to select “Next”, then press [OK].
Access Point Setting (Auto Scan)
Please confirm the setting.
SSID | : Access 1 |
Security | : XXXXX |
Next | WEP/WPA Key : XXXXXXX |
| |
Retry |
|
Cancel |
|
| 3/7 |
7.Use [Î/ ï] to select “Auto” or “Manual”, then press [OK].
•If you select “Auto”:
Follow step 4 in “Auto (Wired)” on page 41.
•If you select “Manual”:
Follow steps 3 to 12 and 14 to 16 in “Manual (Wired)” on page 42.
DNote
• The internal wireless LAN supports following specifications.
- Wireless standards | : IEEE 802.11 b/g/n |
- Frequency | : 2.4 GHz |
- Security protocol | : WEP / WPA / WPA2 |
Manual (Wireless)
Set up the connection to the wireless router manually by entering the wireless network name (SSID). In the following cases, select “Manual”(wireless) to set each setting as necessary.
- When connection test failed with the setting of “Auto Scan”(wireless).
1.Follow steps 1 to 2 in “Auto Scan (Wireless)” on page 44.
2.Use [Î/ ï] to select “Manual”, then press [OK].
3.Wireless router name (SSID) entry screen will appear. Enter the wireless network name (SSID) using cursor buttons, number buttons and color key, then press [RED].
4.Security mode select screen will appear. Select the desired security mode, then press [OK].
• If you select “None”, please go to step 6.
Network Settings (Manual)
IP Address
Please input the IP Address.
0 . 0 . 0 . 0
Nextext | Back Clear OK |
Cancel
5/7
EN
5.“WEP/WPA Key” entry screen will appear. Enter the WEP / WPA / WPA2 key of the selected wireless network using cursor buttons, number buttons and color key, then press [RED].
•If you do not know the WEP / WPA / WPA 2 key for your wireless network, please confirm the sticker on the router.
6.Use [Î/ ï] to select “Next”, then press [OK].
Continued on next page.