Cambridge Audio 650BD user manual Video Setup

9. PBC – Play Back Control

To enable/disable Play Back Control. Play Back Control is a primitive form of disc menu. The options are:

On – If the disc contains Play Back Control, show the menu.

Off – Play back the contents by sequence.

Video Setup

Brightness

Color Space Auto

The "Video Setup" section of the Setup Menu system allows you to configure various video output options. The menu items in this section are:

Menus	Settings
Picture Adjustment	......................................Brightness
	Contrast
	Hue
	Saturation
	Sharpness
Primary Output	HDMI
	Component
TV Aspect Ratio	4:3 Letterbox
	4:3 Pan & Scan
	16:9 Wide
	16:9 Wide/Auto
TV System	PAL (default)
	NTSC
	Multi-system
Output Resolution	Auto
	1080p
	1080i
	720p
	480p/576p
	480i/576i
	Source Direct
1080p24 Output	Auto
	On
	Off (default)
HDMI Option	Colour Space
	Auto
	RGB Video Level
	RGB Limited
	YCbCr 4:4:4
	YCbCr 4:4:2
Screen Saver	On
	Off
	Energy Saver

azur 650BD

1. Picture Adjustment	ENGLISH
This is used to adjust picture control parameters. The 650BD provides a
wide array of picture controls. Please refer to the "Picture Adjustment"
section of this manual for details of each control.
2. Primary Output
To select the primary video output method. The options are:
HDMI – Use HDMI as the primary video output. This setting will ensure
that the HDMI output gets the best possible picture quality. Component
and composite video output may not be available or may be limited to a
lower resolution based on content source limitations.
Component – Use component video as the primary video output. This
setting will ensure that the component output will always be available
and displays proper video signals. With this configuration, the video
decoder in the player performs any necessary format conversion.
Note: Copyright control mechanisms encoded on the disc may limit the
output resolution of the component video output. For DVD, if CSS
encryption is in use the output resolution is limited to no more than
480p/576p; for Blu-ray Discs, the output resolution is limited to no more
than 1080i, and could be lower if the disc contains an Image Constraint
Token.
3. TV Aspect Ratio
To set the aspect ratio of the player’s output image. The options are :
4:3 Letterbox – Choose this when the display is standard 4:3. A
widescreen image is displayed in "letterbox" format with black borders on
top and bottom.
4:3 Pan & Scan – Choose this when the display is standard 4:3. A
widescreen image will be stretched.
16:9 Wide – Choose this when the display is widescreen 16:9. 16:9
materials will be displayed in its native aspect ratio, and 4:3 materials
will be stretched horizontally.
16:9 Wide/Auto – Choose this when the display is widescreen 16:9. 16:9
materials will be displayed in its native aspect ratio, and 4:3 materials
will be displayed with black borders on both sides in order to maintain
the original 4:3 aspect ratio.
4. TV System
To choose the output video standard (PAL/NTSC) to match your TV. The
options are:
PAL – When playing PAL-encoded discs, no system conversion is
performed. NTSC-encoded contents are converted to PAL output. Blu-ray
discs encoded with 24Hz frame rate are converted to 50Hz frame rate if
neither 1080p24 Output nor Source Direct output resolution is enabled.
NTSC– When playing NTSC-encoded discs, no system conversion is
performed. PAL encoded contents are converted to NTSC output. Blu-ray
discs encoded with 24Hz frame rate are converted to 60Hz frame rate if
neither 1080p24 Output nor Source Direct output resolution is enabled.
Multi-system– No system conversion is performed. The output video
system is the same as that encoded on the disc. Blu-ray discs encoded
with 24Hz frame rate are converted to 60Hz frame rate if neither
1080p24 Output nor Source Direct output resolution is enabled. This
mode requires a TV that supports both NTSC and PAL systems.
Note: Do not select "Multi-system"if your TV does not support both PAL
and NTSC systems. The TV display may become a black screen upon
inserting a disc encoded in a different system than your TV supports.
Should this happen, you can press the OPEN button to eject the disc tray,
and then use the Setup Menu to correct the "TV System" setting.

23