Grundig GBP 6000 2D manual Selecting the TV format, Selecting the film mode, 14­ English

INITIAL SETUP ---------------------------------------------------------------------------------------------------------------------

Note:

7The output resolution is based on the type of LED/LCD-TV connected to the device, as described in the table below:

	Correct
LED/LCD-TV TYPE	Resolution
	Setting
If your TV is a standard-defini-	576i/480i
tion PAL TV (SD TV)
If your TV is an enhanced-defini-	576p/480p
tion TV (EDTV)
If your TV is a high-definition TV	720p
(HDTV) capable of 720p only
If your TV is a high-definition TV	1080i
(HDTV) capable of 1080i only
If your TV is HDMI equipped,
and if your TV is a high-defi-
nition TV (HDTV) capable of	1080p
1080p [any frame rate], and	(HDMI)
you are connected to your TV
via HDMI,
If your TV is HDMI equipped,
and you are connected to
your TV via HDMI, and you
wish the BD player to set the	HDMI auto
output based on information
exchanged between the TV
and the player over the HDMI
cable.

Selecting the TV format

The setting depends on your LED/LCD-TV. If you have a LED/LCD-TV with a 4:3 format, select the 4:3 setting; if you have a LED/LCD-TV with a 16:9 format, select the 16:9 setting.

1 In the »Display« menu select »TV Aspect« by using »A« or »S« and press »ENTER« to confirm.

2Choose the setting (»16:9 Wide«, »16:9 Pillar- box«, »4:3 Pan and Scan«, »4:3 Letterbox«) by using »A« or »S« and press »ENTER« to confirm.

Selecting the film mode

The movies are recorded on film at a rate of 24 frames per second. However not all televisions can display 24 frames per second. Off can be selected for 50 frames per second format.

Only the HDMI output of the player is capable of supporting1080 p video output at any frame rate.

1 In the »Display« menu select »Film Mode (1080p24)« by using »A« or »S« and press »ENTER« to confirm.

2 Choose the setting (»Auto«, »Off«) by using »A« or »S« and press »ENTER« to con- firm.

Setting deep color

HDMI 1.3 supports 10-bit, 12-bit and 16- bit (RGB or YCbCr) color depths while 8-bit was supported in previous versions. This expands the colors displayed from millions to billions, which is much more vivid than the previous.

1 In the »Display« menu select »Deep color« by using »A« or »S« and press »ENTER« to confirm.

2Select »Auto« or »Off« by using the cursor but- tons and press »ENTER« to confirm.

End settings for the LED/LCD-TV

1Press »SETUP« to return to the main menu.

14­ ENGLISH