FUNAI MBP5130/F7 Switching Audio Soundtrack, Use K/L to select your desired audio stream channel

Note

•Some discs will only allow you to change the subtitles from the disc menu or pop-up menu. Press [TOP MENU] or [POP MENU / MENU] to display the disc menu or pop-up menu.

•If 4-digit-language code appears in the subtitle menu, refer to “Language Code List” on page 48.

•If the disc has no subtitle language or subtitle style, “Not Available” will be displayed on the TV screen.

•During playback of the secondary video, the primary subtitle setting is not available except when there is no subtitle for the secondary video.

•If you select a language that has a 3-letter- language code, the code will be displayed every time you change the subtitle language setting. If you select any other languages, “---” will be displayed instead. (Refer to page 48.)

Switching Audio Soundtrack

When playing back video material recorded with

2 or more soundtracks (these are often in different audio languages or audio formats), you can switch them during playback.

1.During playback, press [AUDIO].

2.Use [K/L] to select “Primary” or “Secondary” audio to set, then press [OK].

“Primary” : Sets the audio for the primary video.

“Secondary” : Sets the audio for the secondary video.

3.Use [K/L] to select your desired audio stream channel.

•For “Secondary”, use [s/B] to switch between current audio setting and “Off”.

4.Press [AUDIO] to exit.

1.During playback, press [AUDIO].

2.Use [K/L] to select your desired audio stream channel.

•For audio CD, you can select following options.

“Stereo” : Both right and left channels are active (stereo).

“L-ch” :Only left channel is active.

“R-ch” :Only right channel is active.

3. Press [AUDIO] to exit.

Note

•The secondary audio will not be output when the secondary video is not displayed or when “BD Audio Mode” is set to “HD Audio Output”.

(For some BDs, secondary audio will be output even when secondary video is off.)

•The sound mode cannot be changed during playback of discs not recorded in multiple audio.

•Some discs allow changing the audio language setting on the disc menu. (Operation varies depending on the discs. Refer to the manual accompanying the disc.)

•[AUDIO] may not work on some discs with multiple audio streams or channels (e.g. DVDs that allow changing audio setting on the disc menu).

•If you select a language that has a 3-letter- language code, the code will be displayed every time you change the audio language setting.

If you select any other languages, “---” will be displayed instead. (Refer to page 48.)

•Audio Language selection cannot be made during rapid playback. (Refer to page 21.)

•If 4-digit-language code appears in the audio menu, refer to page 48.

•If the disc has no audio language, “Not Available” will be displayed on the TV screen.

•For DTS-CD (5.1 music disc), selecting audio streams or channels is not available.

Setting the BD Audio Mode

There are 2 options for the “BD Audio Mode” setting; either by setting the output to the secondary and interactive audio accompanied by the primary audio or by setting only the primary audio. Depending on the setting of the mode, Dolby Digital, Dolby Digital Plus, Dolby TrueHD, DTS, or DTS-HD output changes between multi LPCM and Bitstream.

1.In stop mode with BD inserted, press [MODE].

2.Use [K/L] to select your desired setting.

“Mix Audio Output”:

If it is available, BD-video’s secondary and interactive audio will be output with the primary audio.

•The secondary audio is the audio for the secondary video (Director’s comment etc.) and the interactive audio is the audio for the interactive application (Button click sounds etc.).

“HD Audio Output”:

Only the primary audio will be output. Set this mode in order to output , Dolby Digital Plus, Dolby TrueHD, or DTS-HD audio of BD through HDMI connection.