FUNAI MBP5130/F7 owner manual Speaker Size

Speaker Setting (Available when you have HDMI cable connected to HDMI OUT jack)

This unit allows you to enjoy multi-channel surround sound such as 7.1-channel / 5.1-channel surround. To make the most of its feature, set up your speakers appropriately by referring to the following table.

How to navigate through “HDMI Multi(LPCM)”:

1)Use [K/L] to select your desired menu item then press [OK].

2)Use [K/L] to select your setting items.

•Press [RETURN] to go back to the previous screen.

3)Use [s/B] to select desired options. (Except for “Test Tone”, “Default” and setting options in “Speaker Size” setting.)

For setting options in “Speaker Size” setting: Press [OK] to select desired options.

For “Test Tone”:

Use [s/B] to select “Off”, “Manual” or “Auto”, then press [OK].

•The test tone will be output. If you select “Manual”, use [K/L] to select desired speaker, then use [s/B] to adjust the volume. If you select “Auto”, use [s/B] to adjust the volume of the speaker that outputs the test tone.

•If you want to stop the test tone, press [RETURN].

For “Default”:

Press [OK] to reset to the default.

4) Press [SETUP] to exit.

Front speaker (left)	Front speaker (right)
	Center speaker
	Subwoofer
Surround	Surround
speaker (left)	speaker (right)
Surround	Surround
back speaker	back speaker
(left)	(right)

e.g.) basic layout with 7.1-channel surround system

<Speaker setting for the audio signal output from HDMI OUT jack>

Quick  HDMI Audio Out  HDMI Multi(LPCM)

Custom  Audio  HDMI Audio Out  HDMI Multi(LPCM)

Menu	Setting items	Descriptions
Speaker Size	Front	Large:
Selects the desired speaker to	Center	For the large speakers with strong
set. Then change the setting by	Subwoofer	low frequency reproduction
referring to the descriptions.		capabilities.
	Surround
		Small:
	Surround Back
		For the small speakers which do
		not provide strong bass sound.
		You cannot change the setting of
		“Subwoofer”. Speakers which are
		not supported by the connected
		device will be displayed in gray.
	Default	Select “Default”, then press [OK]
		to reset
		“Speaker Size” setting to the
		default.

33