FUNAI MBP5130/F7 owner manual Others, Troubleshooting, Problem Solution, Hdcp, Bd / Dvd

Page 45

OTHERS

Troubleshooting

If the unit does not perform properly when operated as instructed in this manual, check the unit, consulting the following checklist.

Problem

Solution

No power.

- Check if the AC cord is properly connected.

 

- Unplug the AC cord once, and wait for 5-10 seconds and then plug it

 

in again.

No sound or picture.

- Check if the connected TV is turned on.

 

- Check if the connections are made securely and correctly.

 

- Check whether the connected TV or other device supports HDCP. (This

 

unit will not output a video signal unless the other device supports

 

HDCP.)

 

- Check whether the output format of this unit (HDMI FORMAT) matches

 

the supported input format of other connected device.

No audio / video signal on the

- If the unit is connected to the unauthorized display device with an

display device via HDMI cable.

HDMI cable, the audio / video signal may not be output.

 

- Perform an HDMI cable hotplug, wherein you disconnect the HDMI

 

cable from the TV and this unit and then reconnect it to both the

 

devices while they are powered on.

 

- Ensure that your HDMI cable is certified.

Distorted picture.

- Sometimes a small amount of picture distortion may appear. This is

 

not a malfunction.

 

- Connect this unit directly to the TV. If the audio / video cables are

 

connected to a VCR, pictures may be distorted due to the copy right

 

protection system.

Completely distorted picture

- Make sure the disc is compatible with this unit.

or black / white picture with

 

BD / DVD.

 

No sound or distorted sound.

- Adjust the volume.

 

- Check if speakers are connected correctly.

 

- Check the HDMI connections.

 

- Check the settings in “Audio” menu.

Picture freezes momentarily

- Check the disc for fingerprints / scratches and clean with a soft cloth

during playback.

wiping from center to edge.

 

- Clean the disc.

Disc cannot be played back.

- Clean the disc.

 

- Ensure the disc label is facing up.

 

- Check if the disc is defective by trying another disc.

 

- Cancel the ratings control or change the control level.

 

- Insert a correct disc that can be played back on this unit.

SD Memory Card cannot be

- The format of the card does not match that accepted by this unit or

read.

the card is not compatible.

No return to start-up screen

- Reset this unit by turning it off, then on again.

when disc is removed.

 

The unit does not respond to

- Aim the remote control directly at infrared sensor window on the front

the remote control.

panel.

 

- Reduce the distance to infrared sensor window.

 

- Replace the batteries in the remote control.

 

- Re-insert the batteries with their polarities (+ / - signs) as indicated.

Buttons do not work or the

- To completely reset the unit, press and hold [ySTANDBY/ON] on the

unit stops responding.

front panel for 10 seconds to shut down the unit or unplug the AC

 

cord from the AC outlet for 5-10 seconds.

The unit does not respond to

- Operations may not be permitted by the disc. Refer to the instructions

some operating commands

of the disc.

during playback.

 

45

Page 44 Page 46
Image 45
Page 44 Page 46
Contents
Blu-ray Disc / DVD Player MBP5130/F7Qualified Service Personnel Safety InstructionsIntroduction Model NoTo Avoid the Hazards of Electrical Shock and Fire Location and HandlingDew Condensation Warning Page Contents Trademark Information Blu-ray DiscCorporation Front Panel Bplay button STANDBY/ON indicatorUnit can also be turned on by pressing these buttons YSTANDBY/ON buttonSetup button Remote Control Hskip buttonNumber buttons Search buttonInstalling the Batteries in the Remote Control Mode buttonClear button Opening ScreenIndicators blink as follows for 30 seconds Indicators blink under the following conditionsConnections Connection to the TVTo set up Hdmi Audio Out, refer to To set up Digital Out, refer toConnection to an Audio System Digital Audio ConnectionConnection to the Network Wired ConnectionHub or wireless broadband router LAN cablenot supplied Wireless ConnectionInternet Finding the Video Channel on Your TVPlayable discs PlaybackPlayable files Media Readable cards Playable files DataOn-Screen Display Region Codes Chapter information Media icon and file nameResume-On-Stop mode Selecting the Media ModeReading the SD Memory Card Use K/L to select SD Card, then press OKTitle menu is also available for SD card with Avchd files Using the Title / Disc / Pop-up MenuPlaying Back Audio CD / Windows Media TM Audio / Jpeg Files IconsPress Cstop to stop playback To return to the first item To return to the file played lastTips for Jpeg / Kodak Picture CD Playback Repeat mode Available media Audio CD Track informationFile information Stop mode, press Mode twice To exit from the program playback modeWMA/JPEG Press Bplay to start program playbackAdjusting the Picture Press OK or s/B to switch 1.3x, or OffRapid Playback  Black levelPress Return or Mode to remove the PIP information PIP Bonusview SettingUse K/L to select the secondary video you want Camera AngleSearch mode Available media Setting the BD Audio Mode Switching Audio SoundtrackUse K/L to select your desired audio stream channel Press Audio to exitNetwork Operations Blockbuster Operations Use s/B to select Configure, then press OKBefore Activating the Connection to Blockbuster Activating the Connection to BlockbusterUse s/B to select Rent or Buy, then press OK Use K/L/s/B to select the desired title, then press OKSearching Movies / TV Episodes Use K/L to select Search, then press OK Vudu Movies Home Screen Guide to Vudu Menu Screen  App Home ScreenVudu Renting or Purchasing Vudu Movies / TV EpisodesFunction Setup Setting items Descriptions Press Setup to exit LanguageCustom VideoDRC AudioDigital Out Setting Hdmi Audio Out SettingQuick  Hdmi Audio Out  Audio Mute  Digital Out LpcmSpeaker Size Menu Setting items Descriptions Delay TimeChannel Level Password Change Age SettingParental Proceed to a C BD Rating LevelOthers Settings with * are the defaultDNS One Touch Play Fun-Link Hdmi CECStandby System Information Get & Set Menu LanguageNetwork Selection  Wired Press OK, then press Setup to exitEasy Wired Custom WiredFor default settings, select Do Not Use Setting menu of Customwired will be displayedUse K/L to highlight the item you want to set MAC Address is for viewing only and cannot be selected Wireless BD-Live SettingConnection Speed 10BASE HalfPress Setup to exit. Note Wireless RouterFollow steps 1 to 3 in Find wireless network on NoneEasy wireless Advanced SettingsProxy Setting  DisableIf the indicator shows Error Indicators show the progress status Network Update Network SettingsProblem Solution TroubleshootingOthers HdcpDVD/ CD Problem Solution Servicing Language Code ListSpecifications Network Service DisclaimerNetwork Service Disclaimer GeneralDiscos reproducibles EspañolArchivos reproducibles Soportes Tarjetas legiblesAsegúrese de que el disco sea compatible con este aparato Es posible que la reproducción comience automáticamenteReproducción se encuentra en el modo Reanudar-Detención Spiegel Drive Groveport, OH Tel