Samsung SFT-202 instruction manual Trouble shooting

Trouble shooting:

If you suspect there is a fault with your receiver, please check the following trouble shooting guide before calling an authorised service agent.

Warning! Under no circumstances attempt to repair the receiver yourself. Tampering with the receiver may result in fatal electric shock and will invalidate your warranty.

Symptom:	Possible cause:
No receiver display	Check that the receiver is plugged in and
	there is power at the mains socket.
Receiver is ON, but no picture or sound	Check that your TV is switched on
Receiver is on, no picture or sound except	Channel scrambled.
menus	Check tuning and set-up
	Check Signal and Data levels.
	Dish moved or LNB is faulty.
Interference on picture, sound OK	Local TV interference, tune the
	output to another channel, or connect to
	TV via SCART or phonos.
Interference on picture, noisy audio	Press Signal key and check if Signal and
	Data levels are good enough.
Receiver not responding to remote	Check remote batteries and that the
	receiver IR sensor is not covered
	(marked IR on the front panel).

26