Samsung SCR-3000P user manual 3Record Setup

Page 23

DIGITAL VIDEO RECORDER

3Record Setup

The following illustrates the intial setting of the RECORD MODE SETUP menu.

RECORD MODE SETUP

DVR INPUT

VIDEO-IN

AUDIO RECORD

ON

PICTURE QUALITY

HIGH

PICTURE RATE

30.00FPS

DISK END MODE

OVERWRITE

DISK END BUZZER

ON

RECORD TIME MARK

ON

TIME MARK POSITION

RIGHT

MOVE=[ ///] SELECT=[ ] EXIT=[MENU]

DVR INPUT

Set the 3 types of Video Input signals going into the DVR.VIDEO-IN is the input signal going into the BNC Video Jack, S-VIDEO is the signal going into the S-VHS Jack, and VCR PB is the VCR playback signal. [VIDEO-IN/S-VIDEO / VCR PB]

AUDIO RECORD

Set to ON to record video and audio at the same time, or set to OFF to record video only. Audio is input and recorded at 6.3 Kbps regardless of the recording field rate of the video

[ON/OFF].

PICTURE QUALITY

Picture quality is divided into four levels. Set to VERY HIGH for the best picture quality, or set to HIGH, NORMAL, or LOW in the descending order of qualty. The user can select the desired quality. [VERY HIGH/HIGH/NORMAL/LOW]

PICTURE RATE

Set the picture rate for the input video. Up to 60 FPS (Fields Per Second) can be recorded. (SCR-3000P models can record up to 50 FPS (Fields Per Second)

SCR-3000N/SSC-Dual (NTSC) [60.00FPS/30.00FPS/15.00FPS/10.00FPS/7.50FPS/5.00FPS/2.50FPS/1.00FPS/ 0.50FPS]

SCR-3000P (PAL) [50.00FPS/25.00FPS/12.50FPS/8.33FPS/6.25FPS/5.00FPS/2.50FPS/1.00FPS/ 0.50FPS]

DISK END MODE

If you select STOP, recording will stop when you consume the full HDD space.

Setting this to OVERWRITE will continue to record the current data by overwriting the previous data. The relative positions where the recorded data are being stored in the HDD will be indicated on the screen in a bar format. If the DISK END MODE is set to STOP, in addition, the remaining HDD capacity will be indicated in percentage (%).

[OVERWRITE/STOP]

DISK END BUZZER

If set to ON, the Buzzer will sound when the HDD is full during the recording; if set to

OFF, the Buzzer will not sound. DISK END MODE needs to be set to STOP for activation.

[ON/OFF]

RECORD TIME MARK

If set to ON, the recording time will be displayed during playback; if set to OFF, it will not be displayed. [ON/OFF]

TIME MARK POSITION

Set the location on the screen where the time of recording will be displayed during playback. Set to LEFT to display it on the bottom left of the screen, or set to RIGHT to display it on the bottom right of the screen. [LEFT/RIGHT]

Note

Set DVR input to VCR PB mode to show video in live video on screen. You can record the videotape into hard disk drive while playing it. Note that OSD will not display while recording. This is normal.

Please note that you cannot open VCR menu while setting the DVR input to VCR PB mode. Timer record setting in DVR menu is disabled as well.

4-7

4-8

Image 23
Contents Digital Video Recorder Digital Video Recorder Important Safety InstructionsContents Summary 1Introduction 2FeaturesFront View 3Name and Function of Each PartBack View Checking the Package Contents Mounting HDD 6Attaching/Detaching HDDII. Connection with Other Devices 2Connection with Multiplexer 1Connection to External DevicesConnection with RS-232C Alarm GND Alarm Reset Trigger Alarm OUTTrigger OUT Alarm OUT GND REC Disk END Connection with PC for UseData Format Samsung Protocol Connection with RS-485III. Basic Method to use Power Off 1Booting the SystemPower On Recognizing incoming video signalWrite 2Basic Screen ViewingViewing Full Screen Viewing Screen during recording Live Screen ViewingPlayback screen Viewing IV. DVR Menus Selecting a Menu Item Changing the Settings1Menu View Entering the DVR Main MenuTime Example of menu setting in case of changing timeEach menu item 2Setting of Date, Time and Screen3Record Setup ➂ Alarm Buzzer 4Alarm Record Setup① Alarm Signal Detection ② Alarm Signal Polarity⑧ Motion Detection ➄ PRE Alarm Time Limit➅ Post Alarm Time Limit ➆ Main Alarm Picture RateMove 5Reservation Timer SetupSize 6System Setup ① Baud Rate 7Communication Setup② Network ACCESS/IP ADDRESS/GATEWAY/SUBNET Mask Viewing VCR MenuEntering the VCR Main Menu ① Manual Archive ② Timer Archive➂ Archive Setup ➃ Archive Check 1VCR MenusFrom Record Event List 2MANUAL ArchiveFrom Motion Event List From Alarm Event ListPicture Sampling Rate Time RangeDirect Archive 3TIMER Archive VCR Buzzer Tape REC if HDD TroubleVCR Speed Tape Select5ARCHIVE Check VI. Record ② Record Stop 1Basic RecordBasic Record ① Current Image Record2Record Lock 3Alarm Record4Reservation Record Reservation Record SetupReservation Record Cancel VII. Retrieval and PlaybackReturning to the Upper Menu or Exit the Current Menu 1Search MenusEntering the DVR Search Menu 3Recorded Data List View 2Retrieval by Date and Time5Searching Motion Detection Recordings 4Alarm Record Retrieval6PB Channel Setup Tape Status HDD SystemHDD Remain VCR SystemTo play back again, press the PLAY/STILL❿II button 8Basic Playback9VCR Playback VCR A-B Repeat Playback 10Searching the Backed-up Data VissDVR A-B Repeat Playback VIII. Others HDD Backup VCR Video TapeProduct Standards 2Appearance DrawingAppendix Trouble Check Points 1Check Points before Call Service CenterQuestion Answer
Related manuals
Manual 261 pages 26.72 Kb

SCR-3000P specifications

The Samsung SCR-3000P is an innovative mobile device that combines cutting-edge technology with user-centric design, making it a standout option in today's competitive market. This device exemplifies Samsung's commitment to delivering advanced features in a sleek and sophisticated form.

At the heart of the SCR-3000P lies a robust processor that ensures smooth performance across all applications. Whether users are multitasking between various apps or streaming high-definition content, the device handles everything with ease. The impressive RAM capacity further enhances this multitasking capability, allowing for seamless transitions and efficient management of resources.

One of the key highlights of the SCR-3000P is its stunning display. Equipped with a high-resolution screen, the device offers vibrant colors and sharp contrast, making it ideal for both media consumption and productivity tasks. The display also features cutting-edge technology that ensures optimal visibility in various lighting conditions, whether indoors or outside in direct sunlight.

In terms of photography, the SCR-3000P boasts a powerful camera system that includes multiple lenses designed for versatility. Users can capture stunning images with high detail and clarity, aided by advanced features such as optical image stabilization and low-light performance enhancements. The front-facing camera is equally impressive, catering to selfie enthusiasts and video callers alike.

Battery life is another significant aspect of the SCR-3000P. The device is equipped with a high-capacity battery that supports fast charging technology, ensuring that users can spend more time enjoying their device and less time tethered to a power outlet. Additionally, power-saving modes help maximize usage time, making it a reliable choice for those on the go.

Security features are paramount in today's digital landscape, and the SCR-3000P does not disappoint. It includes biometric authentication methods such as fingerprint recognition and facial recognition, providing users with peace of mind regarding data protection and privacy.

Connectivity options are robust, with support for the latest wireless technologies, including 5G, Wi-Fi 6, and Bluetooth 5.0. This ensures that users can enjoy fast internet speeds and seamless connections to other devices, enhancing the overall user experience.

In conclusion, the Samsung SCR-3000P is a remarkable device that delivers a blend of performance, design, and functionality. With its array of features tailored to meet the needs of modern users, it stands out as a compelling choice for anyone in search of a high-quality mobile device.