Samsung SCR-3000P user manual From Alarm Event List, From Motion Event List

Page 31

DIGITAL VIDEO RECORDER

(2)FROM ALARM EVENT LIST

FROM ALARM EVENT LIST allows you to back up the video and audio data that has been recorded on the hard drive at the time of an event, which is triggered by alarm input or motion detection, onto a video tape. The following illustration shows the FROM ALARM EVENT LIST screen in detail. The EVENT (ALARM), DATE and TIME indicate when the event was recorded on the hard drive. To exit this screen and return to the MANUAL ARCHIVE menu, press the MENU button.

ALARM EVENT ARCHIVE

[01/03]

ID EVENT

DATE

TIME

01ALARM 2003-07-13 17:25:52 [X]

02ALARM 2003-07-12 06:37:38 [X]

03ALARM 2003-07-11 11:54:34 [X]

MOVE=[ ///] START=[REC] EXIT=[MENU]

Use the UP ( ) and DOWN () buttons to select the event you want to back up. A highlight-

ed cursor should appear over the selected item. Press the ENTER (

 

) button to accept the

 

choice to set the event to [O]. Repeat this procedure for each event you want to back up, and then press the RECORD ( REC ) button to start the backup. The earliest event occurrence will be backed up first.

Once the backup starts, the following information will be displayed.

Event Index

 

 

MACHINE

: SCR-3000 MACHINE 1

RECORD START

: 2003-06-14

09:45:28

CH No.

: 1

 

REC MODE

: 60.00 FPS

 

ARCHIVING START

: 2003-06-14

09:55:35

ARCHIVING METHOD : MANUAL

ARCHIVE

2003-06-14 09:45:45

(3)FROM MOTION EVENT LIST

FROM MOTION EVENT LIST allows you to back up the video and audio data that has been recorded on the hard drive at the time of an event, which is triggered by motion detection, onto a video tape. The following illustration shows the FROM MOTION EVENT LIST screen in detail. The EVENT (MOTION), DATE and TIME indicate when the event was recorded on the hard drive. To exit this screen and return to the MANUAL ARCHIVE menu, press the MENU button.

MOTION EVENT ARCHIVE

[01/03]

ID EVENT

DATE

TIME

01MOTION 2003-07-13 22:42:16 [X]

02MOTION 2003-07-12 14:24:45 [X]

03MOTION 2003-07-11 06:13:52 [X]

MOVE=[ ///] START=[

 

] EXIT=[MENU]

Use the UP ( ) and DOWN () buttons to select the event you want to back up. A highlight-

ed cursor should appear over the selected item. Press the ENTER (

 

) button to accept the

 

choice to set the event to [O]. Repeat this procedure for each event you want to back up, and

then press the RECORD (

REC

) button to start the backup. The earliest event occurrence will

 

be backed up first.

 

 

Once the backup starts, the following information will be displayed.

Event Index

 

 

MACHINE

: SCR-3000 MACHINE 1

RECORD START

: 2003-06-14

09:45:28

CH No.

: 1

 

REC MODE

: 60.00 FPS

 

ARCHIVING START

: 2003-06-14

09:55:35

ARCHIVING METHOD : MANUAL

ARCHIVE

2003-06-14 09:45:45

Note

-If MULTIPLEXER in the SYSTEM SETUP menu of the DVR MAIN MENU is set to WITH, MOTION EVENT ARCHIVE will be disabled. To perform the backup, set MULTIPLEXER in the SYSTEM SETUP menu to WITHOUT.

5-5

5-6

Image 31
Contents Digital Video Recorder Digital Video Recorder Important Safety InstructionsContents Summary 1Introduction 2FeaturesFront View 3Name and Function of Each PartBack View Checking the Package Contents Mounting HDD 6Attaching/Detaching HDDII. Connection with Other Devices 2Connection with Multiplexer 1Connection to External DevicesConnection with RS-232C Alarm GND Alarm Reset Trigger Alarm OUTTrigger OUT Alarm OUT GND REC Disk END Connection with PC for UseData Format Samsung Protocol Connection with RS-485III. Basic Method to use Power Off 1Booting the SystemPower On Recognizing incoming video signalViewing Full Screen 2Basic Screen ViewingWrite Viewing Screen during recording Live Screen ViewingPlayback screen Viewing IV. DVR Menus Selecting a Menu Item Changing the Settings1Menu View Entering the DVR Main MenuTime Example of menu setting in case of changing timeEach menu item 2Setting of Date, Time and Screen3Record Setup ➂ Alarm Buzzer 4Alarm Record Setup① Alarm Signal Detection ② Alarm Signal Polarity⑧ Motion Detection ➄ PRE Alarm Time Limit➅ Post Alarm Time Limit ➆ Main Alarm Picture RateSize 5Reservation Timer SetupMove 6System Setup ① Baud Rate 7Communication Setup② Network ACCESS/IP ADDRESS/GATEWAY/SUBNET Mask Viewing VCR MenuEntering the VCR Main Menu ① Manual Archive ② Timer Archive➂ Archive Setup ➃ Archive Check 1VCR MenusFrom Record Event List 2MANUAL ArchiveFrom Motion Event List From Alarm Event ListDirect Archive Time RangePicture Sampling Rate 3TIMER Archive VCR Buzzer Tape REC if HDD TroubleVCR Speed Tape Select5ARCHIVE Check VI. Record ② Record Stop 1Basic RecordBasic Record ① Current Image Record2Record Lock 3Alarm Record4Reservation Record Reservation Record SetupReservation Record Cancel VII. Retrieval and PlaybackEntering the DVR Search Menu 1Search MenusReturning to the Upper Menu or Exit the Current Menu 3Recorded Data List View 2Retrieval by Date and Time5Searching Motion Detection Recordings 4Alarm Record Retrieval6PB Channel Setup Tape Status HDD SystemHDD Remain VCR SystemTo play back again, press the PLAY/STILL❿II button 8Basic Playback9VCR Playback DVR A-B Repeat Playback 10Searching the Backed-up Data VissVCR A-B Repeat Playback VIII. Others HDD Backup VCR Video TapeProduct Standards 2Appearance DrawingAppendix Trouble Check Points 1Check Points before Call Service CenterQuestion Answer
Related manuals
Manual 261 pages 26.72 Kb

SCR-3000P specifications

The Samsung SCR-3000P is an innovative mobile device that combines cutting-edge technology with user-centric design, making it a standout option in today's competitive market. This device exemplifies Samsung's commitment to delivering advanced features in a sleek and sophisticated form.

At the heart of the SCR-3000P lies a robust processor that ensures smooth performance across all applications. Whether users are multitasking between various apps or streaming high-definition content, the device handles everything with ease. The impressive RAM capacity further enhances this multitasking capability, allowing for seamless transitions and efficient management of resources.

One of the key highlights of the SCR-3000P is its stunning display. Equipped with a high-resolution screen, the device offers vibrant colors and sharp contrast, making it ideal for both media consumption and productivity tasks. The display also features cutting-edge technology that ensures optimal visibility in various lighting conditions, whether indoors or outside in direct sunlight.

In terms of photography, the SCR-3000P boasts a powerful camera system that includes multiple lenses designed for versatility. Users can capture stunning images with high detail and clarity, aided by advanced features such as optical image stabilization and low-light performance enhancements. The front-facing camera is equally impressive, catering to selfie enthusiasts and video callers alike.

Battery life is another significant aspect of the SCR-3000P. The device is equipped with a high-capacity battery that supports fast charging technology, ensuring that users can spend more time enjoying their device and less time tethered to a power outlet. Additionally, power-saving modes help maximize usage time, making it a reliable choice for those on the go.

Security features are paramount in today's digital landscape, and the SCR-3000P does not disappoint. It includes biometric authentication methods such as fingerprint recognition and facial recognition, providing users with peace of mind regarding data protection and privacy.

Connectivity options are robust, with support for the latest wireless technologies, including 5G, Wi-Fi 6, and Bluetooth 5.0. This ensures that users can enjoy fast internet speeds and seamless connections to other devices, enhancing the overall user experience.

In conclusion, the Samsung SCR-3000P is a remarkable device that delivers a blend of performance, design, and functionality. With its array of features tailored to meet the needs of modern users, it stands out as a compelling choice for anyone in search of a high-quality mobile device.