Samsung SCR-3000P ➄ PRE Alarm Time Limit, ➅ Post Alarm Time Limit, ➆ Main Alarm Picture Rate

Page 25

DIGITAL VIDEO RECORDER

PRE ALARM TIME LIMIT

The pre-alarm recording is an important function which enables you to find out about the situation immediately before a motion is detected in the input video or before alarm occurs. Set how much video data you want to record before the motion is detected or alarm is triggered. About 2 seconds to 10 seconds of video data are stored in the system’s SDRAM at all times. When a motion is detect- ed or alarm is triggered, as much data as it is set in the PRE ALARM TIME LIMIT is taken from the SDRAM and written to the HDD as it simultaneously begins the alarm recording. However, since the capacity of the SDRAM is limited, the field rate of the pre-alarm recording will decrease as the time set in the PRE ALARM TIME LIMIT is increased.

[10SECOND/8SECOND/6SECOND/4SECOND/2SECOND/OFF]

Caution

If the system is currently recording, the PRE ALARM TIME LIMIT settings will not be applied even when alarm occurs. The PRE ALARM TIME LIMIT settings are applied only if the system is not currently recording.

POST ALARM TIME LIMIT

Set the amount of video data you want to record immediately after a motion is detected in the input video or alarm is triggered. The system records as long as the time set in the MAIN ALARM TIME, and then records more data as long as the time set in the POST ALARM TIME LIMIT.

[5MINUTE/4MINUTE/3MINUTE/2MINUTE/1MINUTE/30SECOND/20SECOND/

10SECOND/OFF]

Note

The following illustrates the temporal relationship among the main alarm recording time (MAIN ALARM TIME), pre-alarm recording time (PRE ALARM TIME LIMIT), and post alarm recording time (POST ALARM TIME LIMIT) based on the time of alarm occurrence.

Alarm Occurrence

PRE ALARM TIME LIMIT

MAIN ALARM TIME

POST ALARM TIME LIMIT

MAIN ALARM PICTURE RATE

Set the main alarm recording field rate.

(SCR-3000P models supports recording from 0.50 FPS (Fields Per Second) up to 50 FPS)

SCR-3000N/SSC-Dual (NTSC) [60.00FPS/30.00FPS/15.00FPS/10.00FPS/7.50FPS/5.00FPS/2.50FPS/1.00FPS/ 0.50FPS]

SCR-3000P (PAL) [50.00FPS/25.00FPS/12.50FPS/8.33FPS/6.25FPS/5.00FPS/2.50FPS/1.00FPS/ 0.50FPS]

MOTION DETECTION

The DVR will start recording images whenever it detects any movement only when ALARM SIGNAL DETECTION is set to ON. At this time, you can set the detailed items about the motion detection in the SET AREA & SENSITIVITY menu.

Even if MOTION DETECTION is set to ON, if you set MULTIPLEXER to WITH in SYS- TEM SETUP, MOTION DETECTION will be enabled but MOTION RECORD will not be performed. To force stop the recording started by the motion detection, press and hold the STOP( ) button for 3 seconds. Then, the recording started by the motion detection will be paused for 5 seconds, during which time you should go into the menu and set the MOTION DETECTION to OFF to completely stop the recording. If no action is performed by the user for 5 seconds, the system resumes the recording started by motion detection. [ON/OFF]

Caution

When performing the recording started by motion detection, the recording time is determined by the the time set in MAIN ALARM TIME, PRE ALARM TIME LIMIT, and POST ALARM TIME LIMIT as it was the case in the alarm recording.

SET AREA & SENSITIVITY

1)AREA

Areas for motion detection are 4 in total and you can set the LEVEL, SIZE, and MOVE for each area. When you go into SET AREA & SENSITIVITY menu, the following screen appears and the cursor is positioned at the AREA item. At this time, press the

UP( ) or DOWN() button to select the desired area (AREA 0 ~ AREA 3), and press

the ENTER(

 

) button to move the cursor to the LEVEL item to set the sensitivity

 

level for the selected area. [0/1/2/3]

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

AREA=0

LEVEL=OFF [SIZE][MOVE]

 

 

 

 

 

 

 

 

 

 

 

 

 

 

AREA 0

 

 

 

 

 

 

 

 

 

 

 

AREA 1

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

AREA 2

 

 

AREA 3

 

 

 

 

 

 

 

 

 

 

 

 

2)LEVEL

Sensitivity to motion can be set from LOW to HIGH+, or to OFF. Closer to HIGH, more resensitive to motion, closer to LOW, more insensitive to motion.

Press the UP( ) or DOWN() buttion to set the sensitivity level, and press the ENTER

(

 

) button to move the cursor to the SIZE item to set the size of the motion

 

detection area.

[OFF/LOW/LOW+/MIDDLE/MIDDLE+/HIGH/HIGH+]

4-11

4-12

Image 25 Samsung SCR-3000P ➄ PRE Alarm Time Limit, ➅ Post Alarm Time Limit, ➆ Main Alarm Picture Rate, ⑧ Motion Detection
Contents Digital Video Recorder Digital Video Recorder Important Safety InstructionsContents Summary 1Introduction 2FeaturesFront View 3Name and Function of Each PartBack View Checking the Package Contents Mounting HDD 6Attaching/Detaching HDDII. Connection with Other Devices 2Connection with Multiplexer 1Connection to External DevicesTrigger OUT Alarm OUT GND REC Disk END Alarm GND Alarm Reset Trigger Alarm OUTConnection with PC for Use Connection with RS-232CData Format Samsung Protocol Connection with RS-485III. Basic Method to use Power On 1Booting the SystemRecognizing incoming video signal Power OffViewing Full Screen 2Basic Screen ViewingWrite Viewing Screen during recording Live Screen ViewingPlayback screen Viewing IV. DVR Menus 1Menu View Changing the SettingsEntering the DVR Main Menu Selecting a Menu ItemTime Example of menu setting in case of changing timeEach menu item 2Setting of Date, Time and Screen3Record Setup ① Alarm Signal Detection 4Alarm Record Setup② Alarm Signal Polarity ➂ Alarm Buzzer➅ Post Alarm Time Limit ➄ PRE Alarm Time Limit➆ Main Alarm Picture Rate ⑧ Motion DetectionSize 5Reservation Timer SetupMove 6System Setup ② Network ACCESS/IP ADDRESS/GATEWAY/SUBNET Mask 7Communication SetupViewing VCR Menu ① Baud Rate➂ Archive Setup ➃ Archive Check ① Manual Archive ② Timer Archive1VCR Menus Entering the VCR Main MenuFrom Record Event List 2MANUAL ArchiveFrom Motion Event List From Alarm Event ListDirect Archive Time RangePicture Sampling Rate 3TIMER Archive VCR Speed Tape REC if HDD TroubleTape Select VCR Buzzer5ARCHIVE Check VI. Record Basic Record 1Basic Record① Current Image Record ② Record Stop2Record Lock 3Alarm RecordReservation Record Cancel Reservation Record SetupVII. Retrieval and Playback 4Reservation RecordEntering the DVR Search Menu 1Search MenusReturning to the Upper Menu or Exit the Current Menu 3Recorded Data List View 2Retrieval by Date and Time5Searching Motion Detection Recordings 4Alarm Record Retrieval6PB Channel Setup HDD Remain HDD SystemVCR System Tape StatusTo play back again, press the PLAY/STILL❿II button 8Basic Playback9VCR Playback DVR A-B Repeat Playback 10Searching the Backed-up Data VissVCR A-B Repeat Playback VIII. Others Product Standards Backup VCR Video Tape2Appearance Drawing HDDAppendix Trouble Check Points 1Check Points before Call Service CenterQuestion Answer
Related manuals
Manual 261 pages 26.72 Kb

SCR-3000P specifications

The Samsung SCR-3000P is an innovative mobile device that combines cutting-edge technology with user-centric design, making it a standout option in today's competitive market. This device exemplifies Samsung's commitment to delivering advanced features in a sleek and sophisticated form.

At the heart of the SCR-3000P lies a robust processor that ensures smooth performance across all applications. Whether users are multitasking between various apps or streaming high-definition content, the device handles everything with ease. The impressive RAM capacity further enhances this multitasking capability, allowing for seamless transitions and efficient management of resources.

One of the key highlights of the SCR-3000P is its stunning display. Equipped with a high-resolution screen, the device offers vibrant colors and sharp contrast, making it ideal for both media consumption and productivity tasks. The display also features cutting-edge technology that ensures optimal visibility in various lighting conditions, whether indoors or outside in direct sunlight.

In terms of photography, the SCR-3000P boasts a powerful camera system that includes multiple lenses designed for versatility. Users can capture stunning images with high detail and clarity, aided by advanced features such as optical image stabilization and low-light performance enhancements. The front-facing camera is equally impressive, catering to selfie enthusiasts and video callers alike.

Battery life is another significant aspect of the SCR-3000P. The device is equipped with a high-capacity battery that supports fast charging technology, ensuring that users can spend more time enjoying their device and less time tethered to a power outlet. Additionally, power-saving modes help maximize usage time, making it a reliable choice for those on the go.

Security features are paramount in today's digital landscape, and the SCR-3000P does not disappoint. It includes biometric authentication methods such as fingerprint recognition and facial recognition, providing users with peace of mind regarding data protection and privacy.

Connectivity options are robust, with support for the latest wireless technologies, including 5G, Wi-Fi 6, and Bluetooth 5.0. This ensures that users can enjoy fast internet speeds and seamless connections to other devices, enhancing the overall user experience.

In conclusion, the Samsung SCR-3000P is a remarkable device that delivers a blend of performance, design, and functionality. With its array of features tailored to meet the needs of modern users, it stands out as a compelling choice for anyone in search of a high-quality mobile device.