Samsung SCR-3000P user manual 6System Setup

Page 27

DIGITAL VIDEO RECORDER

6System Setup

The following illustrates the intial setting of the SYSTEM SETUP menu.

SYSTEM SETUP

PASSWORD

****

PASSWORD LOCK

OFF

HDD ERASE

OFF

FACTORY RESET

OFF

MENU SCREEN

DARK GRAY

LANGUAGE

ENGLISH

IR REMOCON

OFF

MULTIPLEXER

WITHOUT

MULTIPLEXER SELECT

SAMSUNG SDM-160

MOVE=[ ///] SELECT=[ ] EXIT=[MENU]

PASSWORD

Set the system password. You can enter a 4-digit number and the initial set value is 0000.

PASSWORD LOCK

If you set this to ON, the system will ask for a password, which was set in PASSWORD,

MENU

when your press the MENU ( ) button or when you attempt to cancel the recording lock while recording or when you attempt to remove the video tape from the video deck. If the password is invalid, you will not be able to finish the desired operation. If you set this to OFF, the system will not ask for a password for any of the operations above.[ON/OFF]

HDD ERASE

If you set to ON and exit the menu, the system will delete all data stored on the HDD.

[ON/OFF]

Caution

Verify once again that is is OK to delete the data, as deleted data cannot be restored.

FACTORY RESET

If you set to ON and finish the menu, all settings will be restored to their factory default set- tings. However, the data on the HDD will not be deleted. After RESET The message, “DO YOU REBOOT SYSTEM?” will be displayed. Select YES to reboot the system. [ON/OFF]

MENU SCREEN

If this is set to DARK GRAY, the background of the screen becomes darker when the MENU button is pressed and you will not be able to see the characters clearly. If set to OFF, you can see the current video clearly even when the MENU button is pressed.

[DARK GRAY/OFF]

LANGUAGE

SCR-3000N/SSC-Dual models only supports English. SCR-3000P models however supports German, French, Spanish, and Italian in addition to English.

There is a language support setting function for the convenience of international users. The default language is set to English.

SCR-3000N/SSC-Dual [ENGLISH]

SCR-3000P [ENGLISH/DEUTSCH/FRANÇAIS/ESPAÑOL/ITALIANO]

IR REMOCON

If IR REMOCON to ON, signals from the remote control will be received and if it is set to OFF, signals from the remote control will not be received. The option will be turned off by factory default reset. For instructions on how to use the remote control, please refer to “4.

Introduction to the Remote Control” on page 1-7. [ON/OFF]

MULTIPLEXER

If MULTIPLEXER is set to WITHOUT, ID Detection will not be performed and the system will recognize it as 1CH regardless. If MULTIPLEXER is set to WITH, the Video ID input from the Multiplexer will be detected. Set MULTIPLEXER to WITH, and exit the MAIN MENU (DVR) to automatically start the Multiplexer ID Detection. In addition, MULTI- PLEXER SELECT will be enabled and MOTION DETECTION-related functions will be disabled.

[WITHOUT/WITH]

MULTIPLEXER SELECT

If MULTIPLEXER is set to WITH, MULTIPLEXER SELECT will be enabled. The settings of all recording modes will be dependent on the Multiplexer setting.

The corresponding Multiplexers are SAMSUNG SDM-160(SDM-090), SMO-150(SMO- 210, SOM-080).

SCR-3000N/SSC-Dual [SAMSUNG SDM-160 / SAMSUNG SMO-150]

SCR-3000P[SDM-160P / SAMSUNG VPP]

Caution

Do not set the multiplexer option to [With] and fail to receive the multiplexer output signal as input to avoid error in recording. Please set the multiplexer option to [Without] whenile not receiving the multiplexer output signal as input.

Set the multiplexer option to [Without] unlessif the multiplexer manufacturer of the multiplexer is not Samsung.

4-15

4-16

Image 27
Contents Digital Video Recorder Digital Video Recorder Important Safety InstructionsContents Summary 1Introduction 2FeaturesFront View 3Name and Function of Each PartBack View Checking the Package Contents Mounting HDD 6Attaching/Detaching HDDII. Connection with Other Devices 2Connection with Multiplexer 1Connection to External DevicesConnection with RS-232C Alarm GND Alarm Reset Trigger Alarm OUTTrigger OUT Alarm OUT GND REC Disk END Connection with PC for UseData Format Samsung Protocol Connection with RS-485III. Basic Method to use Power Off 1Booting the SystemPower On Recognizing incoming video signal2Basic Screen Viewing Viewing Full ScreenWrite Viewing Screen during recording Live Screen ViewingPlayback screen Viewing IV. DVR Menus Selecting a Menu Item Changing the Settings1Menu View Entering the DVR Main MenuTime Example of menu setting in case of changing timeEach menu item 2Setting of Date, Time and Screen3Record Setup ➂ Alarm Buzzer 4Alarm Record Setup① Alarm Signal Detection ② Alarm Signal Polarity⑧ Motion Detection ➄ PRE Alarm Time Limit➅ Post Alarm Time Limit ➆ Main Alarm Picture Rate5Reservation Timer Setup SizeMove 6System Setup ① Baud Rate 7Communication Setup② Network ACCESS/IP ADDRESS/GATEWAY/SUBNET Mask Viewing VCR MenuEntering the VCR Main Menu ① Manual Archive ② Timer Archive➂ Archive Setup ➃ Archive Check 1VCR MenusFrom Record Event List 2MANUAL ArchiveFrom Motion Event List From Alarm Event ListTime Range Direct ArchivePicture Sampling Rate 3TIMER Archive VCR Buzzer Tape REC if HDD TroubleVCR Speed Tape Select5ARCHIVE Check VI. Record ② Record Stop 1Basic RecordBasic Record ① Current Image Record2Record Lock 3Alarm Record4Reservation Record Reservation Record SetupReservation Record Cancel VII. Retrieval and Playback1Search Menus Entering the DVR Search MenuReturning to the Upper Menu or Exit the Current Menu 3Recorded Data List View 2Retrieval by Date and Time5Searching Motion Detection Recordings 4Alarm Record Retrieval6PB Channel Setup Tape Status HDD SystemHDD Remain VCR SystemTo play back again, press the PLAY/STILL❿II button 8Basic Playback9VCR Playback 10Searching the Backed-up Data Viss DVR A-B Repeat PlaybackVCR A-B Repeat Playback VIII. Others HDD Backup VCR Video TapeProduct Standards 2Appearance DrawingAppendix Trouble Check Points 1Check Points before Call Service CenterQuestion Answer
Related manuals
Manual 261 pages 26.72 Kb

SCR-3000P specifications

The Samsung SCR-3000P is an innovative mobile device that combines cutting-edge technology with user-centric design, making it a standout option in today's competitive market. This device exemplifies Samsung's commitment to delivering advanced features in a sleek and sophisticated form.

At the heart of the SCR-3000P lies a robust processor that ensures smooth performance across all applications. Whether users are multitasking between various apps or streaming high-definition content, the device handles everything with ease. The impressive RAM capacity further enhances this multitasking capability, allowing for seamless transitions and efficient management of resources.

One of the key highlights of the SCR-3000P is its stunning display. Equipped with a high-resolution screen, the device offers vibrant colors and sharp contrast, making it ideal for both media consumption and productivity tasks. The display also features cutting-edge technology that ensures optimal visibility in various lighting conditions, whether indoors or outside in direct sunlight.

In terms of photography, the SCR-3000P boasts a powerful camera system that includes multiple lenses designed for versatility. Users can capture stunning images with high detail and clarity, aided by advanced features such as optical image stabilization and low-light performance enhancements. The front-facing camera is equally impressive, catering to selfie enthusiasts and video callers alike.

Battery life is another significant aspect of the SCR-3000P. The device is equipped with a high-capacity battery that supports fast charging technology, ensuring that users can spend more time enjoying their device and less time tethered to a power outlet. Additionally, power-saving modes help maximize usage time, making it a reliable choice for those on the go.

Security features are paramount in today's digital landscape, and the SCR-3000P does not disappoint. It includes biometric authentication methods such as fingerprint recognition and facial recognition, providing users with peace of mind regarding data protection and privacy.

Connectivity options are robust, with support for the latest wireless technologies, including 5G, Wi-Fi 6, and Bluetooth 5.0. This ensures that users can enjoy fast internet speeds and seamless connections to other devices, enhancing the overall user experience.

In conclusion, the Samsung SCR-3000P is a remarkable device that delivers a blend of performance, design, and functionality. With its array of features tailored to meet the needs of modern users, it stands out as a compelling choice for anyone in search of a high-quality mobile device.