Bang & Olufsen DVBT/S manual What to do if …, Controlparental Lock

16

The table to the right describes some of the situations you may experience with the DVB–T/S module, and what to do to resolve these situations.

What to do if …

If … Then …

You hear of a new channel or Check for information from the programme provider and make a

station and wish to find it … channel search.

Bring up the DVB–T/S SETUP menu>CHANNELS>SEARCH. Note that when you find new channels or stations, they will be placed under the relevant programme provider.

When you choose a channel The programme provider has probably moved the channel or

number, the screen is black … station. Check for information from the programme provider and do a manual search for a specific channel or station if you have information about, for example, a new frequency. Otherwise make an automatic channel or station search. Bring up the DVB–T/S SETUP menu>CHANNELS>SEARCH. Note that when you find new channels or stations, they will be placed under the relevant programme provider.

When you choose a channel number, the information display shows “CHANNEL NOT FOUND” …

You want to store the channel you are currently watching or the station you are currently listening to in a Group …

You want to use satellite as the source in a Timer Play …

You have forgotten your code for access control …

You wish to add a satellite to the already preset, available satellites …

It could be that you have selected a channel that does not broadcast around the clock. When no programme is broadcast, the information display will show ‘CHANNEL NOT FOUND”.

Bring up the third level of programme information and press the yellow button to add the current channel or station to a Group and follow the instructions in the menus.

Follow the procedure described in the User’s Guide for your television.

Choose DTV or DTV-RADIO as the source of your Timer Play.

Bring up the DVB–T/S SETUP menu>ACCESS CONTROL and enter ‘9999’ three times (for further information see page 12).

Contact your Bang & Olufsen retailer.

You want to restrict the access to Bring up the DVB–T/S SETUP menu>ACCESS

certain channels or stations,	CONTROL>PARENTAL LOCK.
(ACCESS CONTROL) …	Enable the access code. In the channels or stations lists you
	select the channels or stations that should be ‘locked’ (for
	further information, see page 12).
You have deleted channels or	Active channels and stations cannot be deleted from the total
stations from the lists but they	lists, only inactive channels or stations can be deleted. If you
reappear …	delete active channels or stations, they will reappear in the lists
	when the broadcaster sends out information again.