Chapter5 Troubleshooting the System Hard ware
Symptoms and Solutions
5-52
Cisco Wide Area Application Engine 7326 Hardware Installation Guide
OL-6831-02
POST Error Codes
In the error codes in Table 5 -21, X can be any number or letter.
On Off (continued)
2. Remove the adapters and
disconnect the cables and
power connectors to all
internal and external devices.
Power up the system. If the DC
good LED is on, replace the
adapters and devices one at a
time until you isolate the
problem.
3. Check the power supply.
4. Check the power cage
assembly.
5. Check the system board.
On On Power is working properly. No action is required.
Table5-20 Power Supply Error LEDs (continued)
AC Good LED DC Good LED Description Cause and Action
Table5-21 POST Error Codes
Error Code Symptom Cause and Action
062 Three consecutive startup failures
using the default configuration.
1. Run the configuration/setup utility program.
2. Check the battery.
3. Check the system board.
4. Check the microprocessor.
101, 102 System and processor error. Check the system board.
106 System and processor error. Check the system board.