1-11
Csico Wide Area Application Engine 7326 Hardware Installation Guide
OL-6831-02
Chapter1 Introducing the Cisco Wide Area Application Engine
Hardware Features
Input/Output Ports and Connectors
Your WAE appliance supports the following I/O connectors on the front and back
of the device:
•Two Et her net
•One serial
•One Ultra320 SCSI controller (LVD) SCSI
Warning
To avoid electric shock, do not connect safety extra-low voltage (SELV) circuits
to telephone-network voltage (TNV) circuits. LAN ports contain SELV circuits,
and WAN ports contain TNV circuits. Some LAN and WAN ports both use RJ-45
connectors. Use caution when connecting cables.
Statement 1021
Figure 1-5 shows the WAE appliance back panel ports and connectors.
Note The Fibre Channel adapter is supported in PCI slot 3.
Table1-4 Fibre Channel Adapter LEDs
LED State Description
Green
Amber
On
On
Power is on.
Green
Amber
On
Off
Fibre Channel adapter is on line.
Green
Amber
Off
On
Signal has been acquired. (The Fibre Channel
adapter firmware is performing or waiting to
perform Fibre Channel loop initialization.)
Green
Amber
Off
Flashing
Loss of synchronization.
Green
Amber
Flashing
Flashing
Firmware error.