Cisco Systems 7326 manual Ports and LED Indicators, LEDs State Description

Chapter 1 Introducing the Cisco Wide Area Application Engine

Hardware Features

Ports and LED Indicators

Figure 1-10shows the inline network adapter port numbers, interface designations, and LEDs. Table 1-6describes the LED functions.

Figure 1-10 Inline Network Adapter Port Numbering and LEDs

						0		1	2	3
										LINK/ACT
										100	BYPASS
										1000
		0	1		2	3
0	Port 0; Group 1 WAN interface					1	Port 1; Group 1 LAN interface
2	Port 2; Group 0 WAN interface					3	Port 3: Group 0 LAN interface
			The inline network adapter has three LEDs that correspond to each port (the 0
			LEDs correspond to Port 0, and so forth). Table 1-6describes the LEDs.
Table 1-6		Inline Network Adapter LEDs
LEDs				State	Description
Link / Activity				On	The 10/100/1000BASE-T interface is receiving power.
				Blinking	The Ethernet link is transmitting data.
100				On	The speed of the Ethernet connection is 100BASE-TX.
1000				On	The speed of the Ethernet connection is 1000BASE-TX.
Bypass				Both the 100 and	The corresponding ports are in mechanical bypass mode.
				1000 LEDs are
				on

	Csico Wide Area Application Engine 7326 Hardware Installation Guide
1-18	OL-6831-02