Chapter4 Installing Hardware Options
Completing the Installation
4-12
Cisco Wide Area Application Engine 7326 Hardware Installation Guide
OL-6831-02
Installing the WAE Cover and Bezel
To install the WAE cover and bezel, follow these steps:
Step1 Place the cover release latch (labeled 2 in Figure 4-7) in the open (up) position.
Step2 Insert the bottom tabs of the top cover into the matching slotsin the device
chassis.
Step3 Press down on the cover release latch to lock the cover in place.
Figure4-7 Installing the Cover and Bezel
Step4 Install the bezel.
a. Align the hooks on the bottom of the bezel with the device.
1Bezel 2Cover release latch
83237

1 2