4-3
Cisco Wide Area Application Engine 7326 Hardware Installation Guide
OL-6831-02
Chapter4 Installing Hardware Options
Working with Adapters
Caution For proper cooling and airflow, replace the cover before turning on the device.
Operating the device for extended periods (over 30minutes) with the cover
removed might damage device components.
Step5 Remove the bezel (labeled 1 in Figure4-1):
a. Press in on the tabs on the top of the bezel, and rotate the bezel away from the
device front.
b. Store the bezel in a safe place.
Working with Adapters
The WAE 7326 has connectors for up to four PCI adapters on the system board
and PCI riser card. This section provides general information about the system
board, riser card, adapter, and PCI slot configuration specifications, and generic
adapter installation procedures.
Figure 4-2 and Figure4-3 show the location of the PCI-X adapter expansion slots
on the system board and PCI riser card.