Chapter3 Installing the Wide Area Application E ngine
Connecting Cables
3-12
Cisco Wide Area Application Engine 7326 Hardware Installation Guide
OL-6831-02
Connecting CablesTo connect cables to your WAE, follow these steps:
Step1 Power down the appliance before connecting cables to or disconnecting any
cables from the appliance.
Step2 See the documentation that comes with your optional equipment for additional
cabling instructions. It might be easier for you to route the cables before you
install specific optional equipment.
Step3 Cable identifiers are printed on the cables that come with the server and options.
Use these identifiers to connect the cables to the correct connectors.
Figure 3-8 shows the locations of the input and output connectors on your device.
Figure3-8 WAE-7326 Ports and Receptacles—AC System Shown
1Ethernet link status LED 7Power cord connectors and LED
2Ethernet activity LED 8USB connectors (not supported)
3System locator LED 9Video connector (not supported)
TX/RX TX/RXLINK LINK
137693
3
2