Chapter5 Troubleshooting the System Hard ware
Symptoms and Solutions
5-58
Cisco Wide Area Application Engine 7326 Hardware Installation Guide
OL-6831-02
00019502 Microprocessor 2 is not functioning. 1. Check VRM and microprocessor LEDs.
2. Check VRM 2.
3. Check the microprocessor 2.
00019701 Microprocessor 1 failed. 1. Check microprocessor 1.
2. Check the system board.
00019702 Microprocessor 2 failed. 1. Check microprocessor 2.
2. Check the system board.
00180100 A PCI adapter has requested memory
resources that are not available.
1. Reorder the adapters in the PCI slots. It is
important that your startup device is
positioned early in the startup device order so
that it is run by POST.
2. Ensure that the PCI adapter and all other
adapters are set correctly in the
configuration/setup utility program. If the
memory resource settings are not correct,
change the settings.
3. If all memory resources are being used, you
might need to remove an adapter to make
memory available for the PCI adapter.
Disabling the adapter BIOS on the adapter
might correct the error. (Refer to the
documentation provided with the adapter.)
00180200 No more I/O space available for PCI
adapter.
1. Check the adapter.
2. Check the system board.
00180300 No more memory (above 1 MB) for
PCI adapter.
1. Check the adapter.
2. Check the system board.
00180400 No more memory (below 1 MB) for
PCI adapter.
1. Move the failing adapter to slot 1.
2. Check the adapter.
3. Check the system board.
Table5-21 POST Error Codes (continued)
Error Code Symptom Cause and Action