Cisco Systems 7326

Chapter3 Installing the Wide Area Application E ngine

Installing the Wide Area Application Engine 7326

3-10

Cisco Wide Area Application Engine 7326 Hardware Installation Guide

OL-6831-02

Figure3-7 Attaching the Cable-Management Assembly

Step7 Attach the power cords and other cables to the rear of the server (including

keyboard, monitor, and mouse, if required). Attach the power cords to the

cable-restraint bracket. Secure the cable-restraint bracket to the slide rail.

Use cable clamps to secure the cables across the rear of the server. Route the

cables along the cable-management arm channel, securing them with cable straps.

Note Allow slack in all cables to avoid tension in the cables.

Step8 Slide the WAE into the rack until the release latches lock into place. To slide the

WAE out of the rack, press the release latches.

1Hinge pin 3Slide rail

2Left mounting flange

134569