A-5
Cisco Wide Area Application Engine 7326 Hardware Installation Guide
OL-6831-02
AppendixA Wide Area Application Engine 7326 Hardware Specifications
Adapter Specifications
Adapter Specifications
Table A -2 describes the Fibre Channel adapter specifications.
Table A -3 describes the inline network adapter technical and general
specifications.
Note The minimum software release required for the inline network adapter is
WAAS4.0.7.
TableA-2 Fibre Channel Adapter Specifications
Fibre Channel adapter •Bus type: Fiber-optic media (shortwave 50-micron)
•Bus transfer rate: 2 gigabits per second (Gbps) maximum at half duplex
and 4 Gbps at full duplex
•Protocols: Supports FCP1-SCSIprotocol
1. FCP = Fibre Channel Protocol
TableA-3 Inline Network Adapter Specifications
Specification Description
Copper Gigabit Ethernet Specifications
IEEE standard Gigabit Ethernet, 1000BASE-T
Fast Ethernet, 100BASE-T
Ethernet, 10BASE-T
Full duplex and half duplex Supports both half-duplex and full-duplex operation in all
operating speeds
Autonegotiation Autonegotiates between full-duplex and half-duplex
operations and between 1000-Mbps, 100-Mbps, and
10-Mbps speeds