nience, in case the system is accidentally triggered.
➜
Disarming without a transmitter
If your remote transmitter is lost or damaged, you can manually disarm your vehicle security system. To disarm the system without a transmitter, you must have the vehicle's ignition key and know where the Valet® switch is located. Be sure to check with your installer at the time of installation for both the location and the preset response
To disarm the security system, turn the ignition to the ON posi- tion. Press the Valet button the
preset number of times (one to
five times) within 15 seconds. After five seconds, the system will disarm. If the system does not disarm, you may have waited too long; turn the ignition off and on and try again.
Location of Valet Button_________________________________
Number of Presses_____________________________________
Important! The Valet button can be programmed to respond to
16 | © 2008 Directed Electronics — All rights reser ved |