The following is a list of the programmable options, with the factory settings in Bold.
➤Active arming (transmitter only) or passive arming (auto- matic arming 30 seconds after the last door has been closed).
➤Arming/disarming siren chirps on or off.
➤The ignition controlled door lock feature on or off: When this feature is programmed on, the doors will lock three seconds after the ignition is turned on, and unlock when the ignition is turned off. If your installer is programming the security system with the Directed Bitwriter®, ignition lock and unlock are independent features that can be programmed separately.
➤Passive door locking (with passive arming) or active door locking (only when arming with the transmitter). Passive locking allows the vehicle's doors to lock when the security system passively arms (after the
➤Panic mode enabled/disabled when the ignition is turned on. (Some states have laws against sirens sounding in moving cars.)
➤Forced passive arming on or off. If your security system is programmed for passive arming and the forced passive arming feature has been programmed on, the system will passively arm after one hour, even if a protected entry has been left open. Forced passive arming ensures that the system will be armed if a door has accidentally been left ajar when leaving the vehicle.
© 2008 Directed Electronics — All rights reser ved | 31 |