➜
Silent mode
To temporarily turn off the arm or disarm chirps, use Silent
Mode™. Simply press 
for less than one second before arming or disarming, and the confirmation chirp(s) will be elim- inated for that one operation only. If you want the arm/disarm chirps turned off permanently, your dealer can do this for you.
Note: The Warn Away® response to lighter impacts is bypassed if the system is armed using Silent Mode. This ensures that no chirps will be emitted by the siren in an area you want
➜
Panic mode
If you are threatened in or near your vehicle, you can attract attention by triggering the system with your transmitter. Just
press 
for two seconds, and you will enter Panic Mode. The siren will sound and the parking lights will flash for the programmed siren duration. To stop Panic Mode at any time,
press 
on the remote transmitter again.
➜
Valet mode
You can prevent your security system from automatically arming and triggering by using Valet Mode. This is very useful when washing the vehicle or having it serviced. In Valet Mode, the security system will not arm, even with the remote transmitter, but all convenience functions (door locks, trunk release, etc.) will continue to work normally.
© 2008 Directed Electronics — All rights reser ved | 17 |