Setting up the MF-350 universal remote
Example: to set up the MF-350 for your Television:
1.Switch your Television on (not on standby).
2.Find your device code in the code section (page 50 – 69) Codes are listed by brand name. The most popular code is listed first.
3.Press and release the TV key on your
4.
5.
6.
_ _ _ _
Then press and hold down the SETUP key and keep it pressed until the red light (LED under device key) blinks twice.
Enter your
Now, point the
-Most TV’s do not switch back on pressing the POWER key, please try pressing a “number” key to switch your TV back on.
-If your device does not respond, follow steps 1 through 6 with each code listed for your brand. If none of the codes listed for your brand operate your device, then try the Search Procedure described on page 20, even if your brand is not listed at all.
-Some codes are quite similar. If your device does not respond or is not functioning properly with one of the codes, try another code listed under your brand.
-If the original remote control from your Video Recorder / DVD player did not have a POWER key, press PLAY instead of POWER during step 6.
-To set up your other devices, follow the same instructions above, only press the appropriate device key during step 3.
-Remember to press the correct device key before operating your device. Only one device can be assigned to a device key.
19