Learning function
The
Before you start:
•Make sure your original remote is working correctly.
•Make sure neither your
•The
•Please make sure not to use the learning procedure when in direct sunlight or under incandescent lights.
Example: To copy the "mono/stereo" function from your original TV remote control onto the
1.Place the
2.Press and hold the SETUP key until the red light blinks twice. The red light will blink once then twice.
3.Press 9 7 5 (the red light blinks twice).
4.Press the device key (e.g. TV key) on the
5.Press the key (e.g. A key) on the
6.Press and hold the key (on your original remote control) that you want to copy until the red light blinks twice (e.g. mono/stereo key).
7.If you want to copy other functions within the same mode, simply repeat steps 5 and 6 pressing the next key you want to copy by learning.
8.To exit the learning mode, press and hold the SETUP key until the red light blinks twice.
22