AMX R-2 manual Touch And Tilt Sensor

Page 8

Overview

Touch And Tilt Sensor

The Mio R-2 wakes up upon touching either the chrome side rails or pressing a button. When holding the remote and it times out, you can reawaken the device by tilting it. Errant jostling such as a bumped table will not wake the device unless you are holding it.

Specifications

The Mio R-2 device specifications are as follows:

Mio R-2 (FG147-418/433) Specifications

Battery

4 AAA Alkaline Batteries (5 hours battery life)

 

 

Transmission

• AMX 38 KHz/455 KHz IR

Frequencies

• 418 RF (1-way) (FG147-418)

 

 

• 433 RF (1-way) (FG147-433)

 

 

Transmission

• 100 feet at 38KHz (IR)

Range (distance)

• 50 feet at 455KHz (IR)

with Mio IR Receiver

• 300 feet at 418 (RF)

 

 

• 200 feet at 433 (RF)

 

 

Transmission

• 140 degrees (+/-70° from perpendicular) horizontally from an axis extending from

Range (angle)

the end of the remote. (IR)

 

• 40 degrees (+/-20° from perpendicular) vertically from an axis extending from the

 

end of the remote. (IR)

 

 

Top Components

• LED - blue backlit buttons indicate device is awake

 

• Display (OLED) - 128 x 32 pixels, active area is 29.42mm x 7.98mm

 

• Pushbuttons - the power button is red backlit; the rest are blue backlit buttons. 45

 

buttons; 9 custom buttons (3 macro and 6 device).

 

 

Rear Component

• Programming Port - 2.5 mm stereo female conductor jack

 

• Battery Door

 

 

• Rechargeable Battery Connection

 

 

Dimensions (HWD)

9.50 x 2.00 x .74 (241.3 mm x 50.8 mm x 18.80 mm)

 

 

 

Supported Languages:

• English

• Korean

 

• French

• Mandarin Chinese

 

• German

• Portuguese

 

• Greek

• Russian

 

• Italian

• Spanish

 

• Japanese

 

 

 

Weight

• .45 lbs (20 kg) without batteries

 

• .55 lbs (25 kg) with batteries

 

 

Operating Environment:

• Operating Temperature: 0° to 50° C (32° to 122° F)

 

• Storage Temperature: -10° to 70° C (14° to 158° F)

 

 

Other AMX Equipment

DB-9 extension cable (FG10-727)

 

• Programming Cable - a 3 wire, 2.5 mm stereo jack (FG10-817)

 

• Custom engraving (FG147-01)

 

Mio-RCC Kit (FG147-03K)

 

Mio-RCC Charging Base (FG147-02)

 

Mio-RBP Rechargeable Lithium Ion Battery (FG147-10)

 

AXR-RF 418 MHZ RF Receiver (FG782-418)

 

AXR-RF 433 MHZ RF Receiver (FG782-433)

 

 

 

2

Mio Modero R-2

Image 8
Contents Mio Modero R-2 AMX Limited Warranty and Disclaimer Software License and Warranty Agreement Page Table of Contents Table of Contents Mio Modero R-2 Overview Mio Modero R-2Touch And Tilt Sensor FCC compliance Overview Mio Modero R-2 Mio R-2 Setup Installing Your Custom ButtonsBattery Low Indicator Inserting Batteries into The Mio R-2Mio R-2 Setup Mio Modero R-2 Using Connector Ports on The Mio R-2 Programming The Mio R-2IR/RF Code Matrix IR/RF Code MatrixTimeout Adjustment Configuration ModeIR Transmit Mode Download Mode Debug ModeBattery Type LED Sleep Mode BrightnessUpdating Mio R-2 Firmware Click Query for DevicesPersistent Serial Commands Serial CommandsMio Remote Charging Base Mio-RCC Charging BaseSpecifications Mio Remote Charging Base Top and Bottom viewInstalling The Rechargeable Battery Screw Points of The Back HousingChanging Battery Modes Charging The Mio Remote with Charging BaseMio Remote Charging Base Mio Modero R-2 It’s Your World Take Control