AMX R-2 manual Configuration Mode, IR Transmit Mode, Timeout Adjustment

Programming The Mio R-2

IR/RF Code Matrix (Cont.)

Button	Label	Mode	Mode	Mode	Mode	Mode	Mode
		1	2	3	4	5	6
41	S. REV Z	7	47	87	127	167	207
42	PLAY A	1	41	81	121	161	201
43	S. FWD Y	6	46	86	126	166	206
44	REW E	5	45	85	125	165	205
45	FWD D	4	44	84	124	164	204

Configuration Mode

The configuration mode allows you to set the following device features:

IR Transmit Mode (38 KHz, 455 KHz or both 38 KHz IR and RF)

Timeout Adjustment

Download Mode

Debug Mode

Battery Type

LED Awake Brightness

LED Sleep Brightness

To enter configuration Mode:

1.Press and hold the STOP button and the INPUT button. The two buttons must be pressed within 0.1 seconds of each other and held down for 2 seconds. The device indicates you are now in configuration mode. See below for available modes.

2.Press the EXIT key when you are finished.

Your settings will not be lost in the event your batteries die or are removed.

IR Transmit Mode

Pressing button "1" on the remote toggles the IR transmission mode between 38KHz, 455KHz, RF, and both 38KHz IR and RF. The display indicates the current mode.

Timeout Adjustment

Press button "2" on the remote to change the sleep timeout from the default. Each time "2" is pressed, the sleep timeout raises incrementally. The pre-determined sleep timeouts are:

3seconds

6seconds

9seconds

12seconds

The display indicates the selected sleep timeout.

Mio Modero R-2 9