Universal Electronics URC - 4160 instruction manual Changing a Device key, Resetting a Device Key

Changing a Device key

It is possible to change any device key.

Example 1:

To program a second television on the DVD key (for example), you need to change the DVD key into a TV key, so press:

1 SET (*) 9 9 2 TV DVD (**)

The DVD key has now become a second TV key.

2Now enter the Set Up code for your second TV by pressing:

DVD SET (*) _ _ _ _ (TV code) (**)

Example 2:

To program a second Video recorder on the CD key (for example), you need to change the CD key into a VCR key, so press:

1 SET (*) 9 9 2 VCR CD (**)

R

The CD key has now become a second VCR key.

2Now enter the Set Up code for your second VCR by pressing:

CD SET (*) _ _ _ _ (VCR code)(**)

R

(*)Hold down the SET key until the red light blinks twice (the red light will blink once then twice).

(**)The red light blinks twice.

Resetting a Device Key

Example: To reset the DVD key press:

SET (*) 9 9 2 DVD DVD (**)

(*)Hold down the SET key until the red light blinks twice (the red light will blink once then twice).

(**)The red light blinks twice.

Colour & Brightness

Depending on the functions of your original remote control, the TOTAL CONTROL can operate the colour and brightness settings of your Television.

To adjust the colour:

Press the SET key followed by Volume + (for colour +) or Volume - (for colour -).

To adjust the brightness:

Press the SET key followed by Channel + (for brightness +) or Channel - (for brightness -).

9