Volume Punch Through
This feature allows you to adjust the volume in a certain mode (e.g. TV mode) while being in a different mode (e.g. VCR).
Last key pressed: | You can control: |
VCR | TV volume up and down, mute |
SAT | TV volume up and down, mute |
DVD | TV volume up and down, mute |
To punch through to TV volume while in VCR, SAT or DVD mode
press: SET(*) 9 9 3 TV key.
To punch through to AMP/TUN volume while in CD mode
press: SET(*) 9 9 3 AUD key.
To cancel the "Volume Punch Through"
press: SET(*) 9 9 3 Volume(+) (the red light will blink four times).
(*)Hold down the SET key until the red light blinks twice (the red light will blink once then twice).
Auto Scan
Your TOTAL CONTROL comes with a special Auto Scan function which lets you “scan” through every programme available on your device. For example, to scan the programmes on your TV:
1Aim the TOTAL CONTROL at your TV. Press the TV key. Press and release SET then press the MUTE key.
The TOTAL CONTROL will send the command to advance through all the programmes available on your Television stop- ping at each programme for about three seconds. Remember, you must aim the TOTAL CONTROL at your device the enti- re time you are using Auto Scan.
2When you find a programme you would like to watch, simply press any key on the TOTAL CONTROL key pad to stop the Auto Scan feature.
-Auto Scan may not work with devices that did not have programme
10