Universal Electronics Polaris manual Key Charts, Key Function

Key Charts

Key	Function
	Use SETUP for all programming
	sequences.
	Quickly press SETUP twice to enable
	backlighting of all the keys on your
	Polaris Remote Control. After
	backlighting has been enabled, quickly
	press SETUP twice to disable
	backlighting.
	To turn on your television or cable box,
	press TV or CBL once.
	Each device key has an embedded LED
	(red light) that blinks upon selection
	and indicates the remote control is
	working and (after programming) is
	sending signals. When backlighting is
	enabled, all the keys on your remote
	control are lit when you press any key.
	Use GUIDE to display the program
	guide.
	Press MENU once to display available
	interactive services.
	Use INFO to display the current channel
	and program information.
	Use DAY+ (or DAY-) to move a day
	forward (or back) on your cable
	converter’s program guide.
	Use the Cursor keys to move the cursor
	in the program guide and menu screens
	and to navigate within the interactive
	service.
	Use OK/SELECT to choose options, PPV
	events, and to tune programs from the
	program guide.
	Use PAGE+ (or PAGE-) to page up (or
	page down) through menu screens and
	the program guide.
	Use EXIT to exit out of your cable
	converters menu and guide.

www.urcsupport.com

9