Device Table
NOTE: Please refer to the table below when performing the instructions in “Programming Device Control” on page 12.
After programming, the Polaris Remote Control can control the following types of devices:
Device Key | Controls these types of devices |
|
|
Cable Box (Converter)
The CBL key turns your cable box on and off.
Television
The TV key turns your television on and off.
INSTALLING BATTERIES
❶
❷
1.On the back of the remote control, push the tab and lift off the battery cover.
2.Locate the two (2) enclosed AA batteries. Match the + and - marks with those in the battery case, then insert them. Align the cover’s keys with the case’s holes and press the cover back into place. The tab should click when the cover is locked.
3.Test the remote control by pressing any mode key (e.g., TV). If the batteries are inserted correctly, the LED (red light) blinks once.
NOTE: When batteries need replacement, the remote control ceases to operate. Replace the batteries and the unit is restored to its full functionality, complete with your favorite settings.
www.urcsupport.com
11