Universal Electronics Programming Your Kameleon-C6 Remote, To Program Your KAMELEON-C6 Remote

Kameleon C6_v10.qxd 5/14/03 9:16 AM Page 11

PROGRAMMING REMOTE

Programming Your Kameleon-C6 Remote

The device mode keys located at the top of your Kameleon-C6 Remote are designed to control:

TV	•Cable Box		•DVD
	•Video		•VCR
		Accessory	•PVR

•Amp/Tuner	•VCR	•Amp/Tuner
•Amplifier	•DVD	•Amplifier
•CD	•PVR	•CD
•Home		•Home
Theater in		Theater in
Box		Box

TO PROGRAM YOUR KAMELEON-C6 REMOTE

To set up other devices, perform the following steps to program your Kameleon-C6 Remote. Repeat the steps for each desired device one at a time.

1.Turn your device on.

2.Find your device code in the Manufacturer Code section (see page 28-41). The most com- mon code for each brand is listed first.

3.Press the desired device mode key on your Kameleon-C6.

4.Press Setup for at least 3 seconds. The bot- tom of the IR indicator will blink twice.

5.Enter the first four-digit Manufacturer Code. The bottom of the IR indicator will blink twice.

6.Lastly, aim the Kameleon-C6 at your device and press Power. If the device does not respond, repeat steps 3-5 using the next Manufacturer Code listed under your brand.

7.Repeat the process for each additional device you would like to program into the remote.

Manufacturer Codes Glossary\Trouble Shooting Advanced Options Programming Remote Batteries\Keypad Overview Introduction

Programming Your Kameleon-C6 Remote 11