Kameleon C6_v10.qxd 5/14/03 9:16 AM Page 21
ADVANCED OPTIONS
TO PROGRAM A MACRO
1.Press Cable device mode key.
2.Press Setup for at least 3 seconds. The bot- tom of the IR indicator will blink twice.
3.Press 9 9 5 on the keypad. The bottom of the IR indicator will blink twice.
4.Press VOD key.
5.Press Cable Device mode key followed by 0-0-1.
6.Lastly, to save the Macro, press Setup for at least 3 seconds. The bottom of the IR indicator will blink twice.
Now, whenever you press the programmed custom VOD key, the
REMEMBER
•EACH MACRO CAN CONSIST OF A MAXIMUM OF 15 KEYSTROKES.
•YOU CAN COMBINE A LEARNED KEY IN A MACRO SEQUENCE, CREAT-
ING AN EVEN MORE PERSONALIZED
•TO INCLUDE A FUNCTION FROM A PARTICULAR SCREEN IN A DEVICE MODE, USE THE SCROLL KEY.
•MAKE SURE THAT YOU PROGRAM A MACRO ON A SPARE KEY THAT YOU DON’T USE IN ANY DEVICE MODE.
•ONCE YOU PROGRAM A MACRO ON A SPECIFIC KEY, THE SEQUENCE WILL WORK REGARDLESS OF THE DEVICE MODE YOU ARE IN. THIS MEANS THAT THE FUNCTION ORIGINALLY PROGRAMMED ON THAT SPE-
CIFIC KEY WILL BE OVERWRITTEN.
•TO AVOID ACCIDENTAL RECORDINGS, YOU MUST PRESS THE RECORD KEY ON YOUR
OMMEND ASSIGNING A MACRO TO THIS KEY.
•IF YOU HAD TO HOLD DOWN A KEY FOR A FEW SECONDS ON THE ORIGINAL REMOTE CONTROL TO GET A FUNCTION, THIS FUNCTION MAY NOT WORK IN A MACRO ON YOUR
•A KEY THAT IS PROGRAMMED WITH A MACRO WORKS IN ANY DEVICE MODE INCLUDED ON THAT MACRO.
You can delete a Macro for any of the keys that were assigned a macro.
TO DELETE A MACRO
1.Press Setup for at least 3 seconds. The bot- tom of the IR indicator will blink twice.
2.Press 9 9 5 on the keypad. The bottom of the IR indicator will blink twice.
3.Press the desired custom Macro key.
4.Press Setup for at least 3 seconds. The bot- tom of the IR indicator will blink twice.
Manufacturer Codes Glossary\Trouble Shooting Advanced Options Programming Remote Batteries\Keypad Overview Introduction
Creating Other Macros 21