Universal Electronics C6 owner manual To Activate Channel Control Lock

Kameleon C6_v10.qxd 5/14/03 9:16 AM Page 16

KAMELEON-C6 REMOTE

Channel Control Lock

The Kameleon-C6 Remote includes a program- ming feature that allows you to program the remote’s channel control capabilities to be locked to the cable converter using the following keys: 0~9, CH+, CH-, ENTER,and LAST*. This will guarantee that you do not inadvertently change a channel on your TV or VCR.

This feature is de-activated by default and can be activated or de-activated by following the steps below.

*NOTE: THIS FEATURE DOES NOT AFFECT THE AUD OR AUX MODES.

TO ACTIVATE CHANNEL CONTROL LOCK

1.Press CBL device mode key once. It will blink once.

2.Press Setup until the CBL key blinks twice, then release Setup.

3.Enter 9 7 3.The CBL key will blink twice.

4.Press CH + once. The CBL key will blink two times.

5.Now, regardless of what mode you select (except AUD or AUX), only the channel control capability of your cable converter will be accessible.

TO DE-ACTIVATE CHANNEL CONTROL LOCK

1.Press CBL device mode key once. It will blink once.

2.Press Setup until the CBL key blinks twice, then release Setup.

3.Enter 9 7 3.The CBL key will blink twice.

4.Press CH- once. The CBL key will blink four times.

5.Now, the remote control will provide TV and VCR channel-control capabilities while in the TV or VCR mode.

16 Channel Control Lock